last weekend was aberdeen to england to aberdeen in a hired iveco van to pick up avon kit and donor pack. All installed in garage, body suspended from rafters. Where to start?

Read the instructions a few times before you do any thing check over all of the bits and make sure that all is as it should be and then start at the beginning.
best wishes
Iain

Instructions? whats that then??

quote:

---

Originally posted by shades
All installed in garage, body suspended from rafters. Where to start?

---

There is a very good document going around - I will try and find the link for you.....

As far as the bodywork is concerened it is very important that you support the bodywork and bonnet fully. If you don't support it now the body will sag and become deformed - which will make life a bitch when you come to fit it....

Also check the alignment of the short piece of tubing for the steering column, this is notorious for being out of line. Not a huge job to fix but better to do now rather than later when it is more awkward.

And remember it's not really all that bad

Good luck - we look forward to seeing some progress piccy's

HTH

Cheers

The doc is on the Yahoo Tiger Group

try this link

Unsure but you may need to join the group and then look under files...

Cheers HERE

[Edited on 25/8/04 by protofj]