Does anyone know where I can get a star socket that fits the cylinder head bolts on a 4age engine? I have tired all the local tool shops and they are
too fat and short.
it needs to be an E16, with a outside diameter of less than 18mm and a depth of greater than 38mm.
Any suggestions?
I used a long 3/8" drive socket. The Halfords Professional series 3/8" long socket is a 12-point socket, just what you need.
All my other long sockets are hexagonal, and my regular sockets are 12-point, but too short.
Cheers,
Eddy
thanks... wish I had asked the question earlier... just back from halfords empty handed. oh well
Yup it's a 10mm double hex long socket.
Buy 2 because they are not really designed for the amount of torque involved. I've split a couple in the last year or so.
[Edited on 21/4/06 by ChrisJLW]
could'nt find one so have turned down a regular E16 torx bit. It has worked ok to get the bolts out. Wife away so head in dishwasher cleanin up