Board logo

Grille CAD model or Drawing
the_big_1 - 1/10/19 at 06:16 PM

Hi guys,

Trying to get a CAD model or drawing for a grille to fit the nose on my Haynes.
The nose isnt cut out and is the kit from Als locost bodyshop.
Dont want to cut it until I have a grille that fits etc.

Just need outline model or drawing etc or a guaranteed grille supplier that fits etc


Cheers.


40inches - 1/10/19 at 08:03 PM

quote:
Originally posted by the_big_1
Hi guys,

Trying to get a CAD model or drawing for a grille to fit the nose on my Haynes.
The nose isnt cut out and is the kit from Als locost bodyshop.
Dont want to cut it until I have a grille that fits etc.

Just need outline model or drawing etc or a guaranteed grille supplier that fits etc


Cheers.

I fitted mine on the inside of the return.
Description
Description
Description
Description
Description
Description


nick205 - 2/10/19 at 03:12 PM

Fitted my MK grille with the the tabs bent over to the edges of the nose cone return. 1/2hr to fit, never came out or caused any issues.


the_big_1 - 2/10/19 at 03:18 PM

Hi ya,

Yeah that's the sort of grille I am looking for but want to make sure it's not bigger than the gap etc. An outline of one would be fab lol


nick205 - 2/10/19 at 04:21 PM

quote:
Originally posted by the_big_1
Hi ya,

Yeah that's the sort of grille I am looking for but want to make sure it's not bigger than the gap etc. An outline of one would be fab lol



Can't help I'm afraid I sold the car quite a few years ago so it's not with me any more.