Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Gaitors/bellows
omega 24 v6

posted on 19/1/21 at 10:05 PM Reply With Quote
Gaitors/bellows

Hi guys its been quite a while since ive been on here. Car long sold with no regrets of either building or selling. I moved on to a house restoration for the last 4 yeas which led to me buying a mini digger. I'm now in the process of refurbishing the said digger and have come up short sourcing some parts.
I then remembered that the guys on here had always been a great source of information and very seldom if ever couldnt help.
So here goes.
Its an Airman ax08 microdigger and im trying to source new control lever bellows. They are a grommet type fittment about 100mm square at the grommet end and with a 12mm shaft hole at the top. I suspect yanmar or kubota may be similar but have come up with nothing so far.
Ive attached a couple of pictures for info.
As ever folks thanks in advance for any help.











If it looks wrong it probably is wrong.

View User's Profile E-Mail User View All Posts By User U2U Member
SteveWalker

posted on 19/1/21 at 11:15 PM Reply With Quote
100mm square and 12mm diameter - I would have thought that a fair few gear -lever gaiters would be in that range.
View User's Profile View All Posts By User U2U Member
jacko

posted on 20/1/21 at 09:59 AM Reply With Quote
Off top of my head my 3 cortina gear stick
Graham

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Mr Whippy

posted on 20/1/21 at 11:10 AM Reply With Quote
CBS link
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
nick205

posted on 21/1/21 at 10:18 AM Reply With Quote
Do you have to replace with rubber gaitors - could you replace with material like many use around their handbrake levers?
View User's Profile View All Posts By User U2U Member
omega 24 v6

posted on 21/1/21 at 10:25 AM Reply With Quote
Prefer rubber. The CBS 9news might do though. Cheers guys.





If it looks wrong it probably is wrong.

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.