LocostBuilders - powered by XMB

Team Dynamics Pro Race 1.2 with R888's

Digimon - 28/4/16 at 03:34 PM

4 x 15" 7J Team Dynamics Pro Race 1.2 with 195/50/15 and 205/50/15 R888's

195's have the following tread reaming
No.1 = Outside - 5mm, Center - 6mm, Inside - 4.5mm
No.2 = Outside - 4.5mm, Center - 6mm, Inside - 5.5mm

205's have the following tread reaming
No.1 = Outside - 6mm, Center - 6mm, Inside - 6mm
No.2 = Outside - 7mm, Center - 6mm, Inside - 7mm

Unfortunately the ET isn't marked on the wheels but they fit my Ford based MNR very well

One of the rear wheels has some lacquer lifting please see the photos

Collection Only from Deal, Kent, CT14

Ł550ovno

furryeggs - 28/4/16 at 03:44 PM

Sorry to hijack your thread but is that the same car thats in your avatar, it looks a different colour, is that a nardo grey wrap?

loggyboy - 28/4/16 at 03:48 PM

quote:
Originally posted by furryeggs
Sorry to hijack your thread but is that the same car thats in your avatar, it looks a different colour, is that a nardo grey wrap?

Just a very filtered picture by looks of it.

Digimon - 28/4/16 at 03:49 PM

quote:
Originally posted by furryeggs
Sorry to hijack your thread but is that the same car thats in your avatar, it looks a different colour, is that a nardo grey wrap?

That's ok, no its the same colour as my avatar porsche baby blue.

Thanks Simon

PAUL FISHER - 28/4/16 at 04:08 PM

They must be some tyre now those R888's they add tread depth as you use them, as they only come with 5mm tread when new

Digimon - 28/4/16 at 04:22 PM

That's strange, I did avoid the pickup from the track as well.

I'll say that are almost new then lol

bi22le - 28/4/16 at 06:39 PM

Joking aside i found tyres last for ever on these cars.

My R888 had about 10 trackdays put on them before i decided that they had started to go hard and had to many heat cycles put through them.

I now have them as my spares as they are still better than normal road tyres.

Digimon - 2/5/16 at 11:34 AM

Bump

daveb666 - 3/5/16 at 08:11 AM

Could you find the offset out?

It'll be stamped on the inside of the rim

loggyboy - 3/5/16 at 09:00 AM

quote:
Originally posted by PAUL FISHER
They must be some tyre now those R888's they add tread depth as you use them, as they only come with 5mm tread when new

IIRC they quote 5mm, but when you measure they almost always have 6mm.

Digimon - 3/5/16 at 09:50 AM

quote:
Originally posted by daveb666
Could you find the offset out?

It'll be stamped on the inside of the rim

Hi Dave,

Unfortunately the ET stamp is blank on the all the wheels

Thanks
Simon

Digimon - 3/5/16 at 09:54 AM

quote:
Originally posted by loggyboy

quote:
Originally posted by PAUL FISHER
They must be some tyre now those R888's they add tread depth as you use them, as they only come with 5mm tread when new

IIRC they quote 5mm, but when you measure they almost always have 6mm.

That's good to know, I have remeasured them avoiding the pickup and it is right what I've written down. I thought I was going mad lol

Digimon - 9/5/16 at 05:51 PM

Bump

Ł500 ovno

Digimon - 17/5/16 at 03:41 PM

Bump

mikey p - 22/5/16 at 06:50 PM

Can you try and measure the ET please?

Digimon - 22/5/16 at 07:28 PM

quote:
Originally posted by mikey p
Can you try and measure the ET please?

Hi Mikey,

I have followed a youtube tutorial and come up with -21 ET

Thanks
Simon

[Edited on 22/5/16 by Digimon]

Digimon - 26/5/16 at 05:59 PM

Bump

Digimon - 6/6/16 at 07:56 AM

Bump

Digimon - 23/6/16 at 07:31 AM

Bump Ł400

Mash - 23/6/16 at 09:27 AM

Sorry to be picky D, but could you measure the distance from the inner rim to the face that bolts on to the hub for me, so I can compare it to mine?

cheers

Digimon - 23/6/16 at 09:30 AM

quote:
Originally posted by Mash
Sorry to be picky D, but could you measure the distance from the inner rim to the face that bolts on to the hub for me, so I can compare it to mine?

cheers

Hi Mash,

Yes sure I'll measure this for you this evening

Digimon - 23/6/16 at 07:40 PM

Hi Mash,

They measure 130mm from the outside to the inner face of the wheel, hope this helps

Simon

Mash - 23/6/16 at 07:55 PM

Sounds fairly good to me D.

Can't get at the car right now, but will measure up in the morning and get back to you.

Mike

Mash - 24/6/16 at 08:49 AM

Sorry D, measured up my existing wheels, and they are only 50 mm, so this would mean the new outide edge would 67.5 mm further out which is too far to adjust for.

Gutted

Digimon - 24/6/16 at 08:54 AM

Hi Mike,

That's a shame, thanks for getting back to me tho

Digimon - 24/6/16 at 09:29 AM

Now on eBay guys

eBay Item