rash12
|
| posted on 7/1/17 at 07:15 PM |
|
|
dutton top wishbones
hoping for some advice from the knowledge on here, a friend of mine has a dutton phaeton, does anyone know if there is a polybush kit for the top
front wishbones please
|
|
|
|
|
softfeet
|
| posted on 7/1/17 at 10:04 PM |
|
|
The Series 1 and 2 Phaetons used Triumph Spitfire front suspension so would use a polybush kit for that car.
The Series 3 and 4 Phaetons used Dutton's own arrangement. The top front wishbones came with the kit and were pre-fitted with bushes. I do not
know what car the bushes were off, but it may be possible to measure the existing ones or to contact the Dutton Owners club, who may know the answer.
|
|
|
rash12
|
| posted on 7/1/17 at 10:36 PM |
|
|
apparently the triumph wishbones where made from a c section material and the dutton ones where tubular, this one is tubular
|
|
|
sprintB+
|
| posted on 8/1/17 at 04:17 PM |
|
|
As a Duttoneer, or is it Duttonette ? I can tell you that Triumph front bushes will fit in the tubular top arms 
|
|
|
rash12
|
| posted on 8/1/17 at 05:34 PM |
|
|
thanks sprint b+ much appreciated
|
|
|
