Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Parts Required - Wheels, body panels, suspension, roll cage etc
Jonb_5

posted on 7/1/18 at 05:49 PM Reply With Quote
Parts Required - Wheels, body panels, suspension, roll cage etc

Hi,

I am building a Haynes Roadster and am on the lookout for most parts second hand, if you have anything give me a shout.

Specific parts I'm after immediately include:

Full Roll cage, msa spec
Bonnet
Scuttle Panel
Fuel tank for MX5 fuel pump.
Seats
Ford fitment 13 x 7 or 13 x 8 wheels
Suspension

Thanks for looking

Jon

View User's Profile View All Posts By User U2U Member
Nickp

posted on 7/1/18 at 10:37 PM Reply With Quote
Will 13" wheels fit?
View User's Profile View All Posts By User U2U Member
voucht
Contributor






Posts 229
Registered 22/5/11
Location 1
Member Is Offline

Photo Archive Go!
Building: Haynes roadster on the road since november 2014 bu

posted on 8/1/18 at 12:25 AM Reply With Quote
13'' wheels will definitely not fit with standard (book) rear wishbones and uprights. I once tried the 14'' from my donor (Sierra), and the wheel touched the lower bolt and nut (lower rear wishbone/rear upright liaison)

Good luck with the build though!

Have you tried registering on the Haynes Forum (http://forums.haynes.co.uk/index.php). I know a lot of people have had issues registering the past year, but I also know some could. So it is worth a try.





555

View User's Profile E-Mail User View All Posts By User U2U Member
Jonb_5

posted on 8/1/18 at 02:21 PM Reply With Quote
Many thanks for the replies.

I will be running a Ford live rear axle setup so should be OK with the wheels. Just my preference, I know it seems a bit backwards.

I have tried registering on the forum but it wont let you and there doesn't seem to be any response via email to assist either.

Thanks

Jon

View User's Profile View All Posts By User U2U Member
nilocp

posted on 8/1/18 at 07:58 PM Reply With Quote
Hi Jon, I have a set of 13in wheels, 6 and 7in. They were for my abandoned project.

Compomotive ML, black, see my Photo Archive for pics.

I will take £200 for them, the tyres are free but very usable.

Must be collected from West Yorkshire

Colin

View User's Profile View All Posts By User U2U Member
snippy

posted on 8/1/18 at 09:51 PM Reply With Quote
Jon,
I have a complete set of bodywork removed from a Tiger Avon. I haven't got around to advertising it yet. Let me know if interested.
Nick

View User's Profile E-Mail User View All Posts By User U2U Member
Jonb_5

posted on 9/1/18 at 11:37 AM Reply With Quote
Hi

Thanks for the offers . West Yorkshire is probably a bit too at for collection.

I should have probably said in based in Devon but I travel to am from London on a weekly basis so can travel most places but all around the M5 and M4 going south.

Thanks

Jon

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.