Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Seat Altea headlamp bulb replacemant
John G

posted on 28/11/18 at 09:44 AM Reply With Quote
Seat Altea headlamp bulb replacemant

Any experience of changing the bulbs in an Altea?
My wife's dip and main have gone on one side and it looks impossible to remove the rear cover from the inside, so I look to draw forward the headlamp which I only have access to one torx screw. I am now looking to remove the bumper to access the screws. Am I missing something? or is this the only way to get at the bulb?

Regards, John

View User's Profile View All Posts By User U2U Member
computid

posted on 28/11/18 at 11:10 AM Reply With Quote
I just googled for the owners manual...

https://www.manualslib.com/manual/1148596/Seat-Altea.html?page=244#manu al






View User's Profile Visit User's Homepage View All Posts By User U2U Member
daviep

posted on 28/11/18 at 11:11 AM Reply With Quote
What year?

My 2006 you can replace all bulbs without removing the headlamp, in modern terms they are very simple, my wife does them herself on occasion !!!

There are a big inspection hatches over the bulbs, one has a rubber cover the other is hard plastic with a spring clip top and bottom.

Cheers
Davie





“A truly great library contains something in it to offend everyone.”

View User's Profile E-Mail User View All Posts By User U2U Member
John G

posted on 28/11/18 at 11:52 AM Reply With Quote
Seat Altea headlamp bulb replacemant

Thanks for the replies. the model is a 2010 and I had seen the owners manual with that diagram. the 2010 does not look like that. There are at least 3 torx screws holding the back plate on two of which are obstructed which leads me to think that the lamp needs to come out.
Regards John

View User's Profile View All Posts By User U2U Member
nick205

posted on 28/11/18 at 11:57 AM Reply With Quote
Not done an Altea, but have done Seat Alhambra and Leon, VW Touran and Passats (ranging from 2000 to 2007). At no point has it been necessary to remove the headlamp or bumper! As "daviep" says there's a rubber or plastic cover at the rear of the hadlamp unit, which comes off to expose a metal clip that holds the bulb holder in place. Usually a 10 minute job outside the motor factors or the house.

I've not had to replace LED bulbs and they may well be different, but I really can't imagine even those are headlamp unit out or bumper off!

[Edited on 28/11/18 by nick205]

[Edited on 28/11/18 by nick205]

View User's Profile View All Posts By User U2U Member
gremlin1234

posted on 28/11/18 at 02:42 PM Reply With Quote
is it fitted with normal halogen bulbs, or the gas-discharge ones?
also does it have the dynamic lights?

hopefully this page may help, (and it shows the 2 screws for removing the whole headlamp)
https://seat.7zap.com/en/e/altea/alt/2010-498/9/941-941021/#1

View User's Profile View All Posts By User U2U Member
John G

posted on 28/11/18 at 03:59 PM Reply With Quote
Seat Altea headlamp bulb replacemant

Many thanks Gremlin, that is the one. Where is the best place for gas discharge bulbs?
Regards John

View User's Profile View All Posts By User U2U Member
nick205

posted on 28/11/18 at 04:28 PM Reply With Quote
I always try and use a local motor factor for parts, but failing that Halfords should have them as well.

Pretty sure Halfords offer a fitting service for something like £5 extra as well.

View User's Profile View All Posts By User U2U Member
ttalps2000

posted on 28/11/18 at 04:50 PM Reply With Quote
if its anything like the ones on my 2010 fabia, they are a b@stard to do! Fuel filter right behind the light unit! Took it to a local Skoda specialist and they didnt really want to do it either they are so bad!!
View User's Profile View All Posts By User U2U Member
gremlin1234

posted on 28/11/18 at 08:54 PM Reply With Quote
I noticed that (from the link I gave earlier)
items 14 and 15 are described as
"repair kit for headlamp housing"
suggesting it is 'normal' for these to break!

View User's Profile View All Posts By User U2U Member
jollygreengiant

posted on 28/11/18 at 11:03 PM Reply With Quote
It seems to be standard practice on a LOT of modern vehicles, it's down to the design of how to get a lot into a small(er) space. The person on the computer says, "Yes I can fit that in there." with no real thought of repair, because, they have never wielded a spanner in their life. So, we end up with the ridiculous scenario where on a lot of vehicles, it's a case of, bumper off and headlamp out, to change a bulb. Go figure.





Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.

View User's Profile View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.