CosKev3
|
posted on 3/3/19 at 09:47 PM |
|
|
quote: Originally posted by theduck
Boost control is a pwm output and different to the “programmable” outputs.
Ah right,thanks![](/images//smilies/smile.gif)
|
|
|
40inches
|
posted on 24/3/19 at 01:43 PM |
|
|
Just got back from having the VVT set up.
272bhp after 2 hours on the dyno.
The photo upload has stopped working again So will post the Dyno graphs when I find
a suitable hosting site.
|
|
pigeondave
|
posted on 24/3/19 at 01:50 PM |
|
|
shiver me timbers
you must be happy with that.
How many torques.
|
|
40inches
|
posted on 24/3/19 at 02:02 PM |
|
|
quote: Originally posted by pigeondave
shiver me timbers
you must be happy with that.
How many torques.
Around 250 starting at over 200 at 2000rpm.
With the VVT set up as Jaguar from the factory, we got the rated 240bhp, it looks like
Jaguar neutered the engine, possibly for emissions????
|
|
pigeondave
|
posted on 24/3/19 at 02:27 PM |
|
|
quote: Originally posted by 40inches
With the VVT set up as Jaguar from the factory, we got the rated 240bhp, it looks like
Jaguar neutered the engine, possibly for emissions????
And I trust you'l bee winding it back a little for the same reasons ![](/images//smilies/bigsmile.gif)
Out of interest what box and diff are you using?
|
|
CosKev3
|
posted on 24/3/19 at 03:58 PM |
|
|
quote: Originally posted by 40inches
Just got back from having the VVT set up.
272bhp after 2 hours on the dyno.
The photo upload has stopped working again So will post the Dyno graphs when I find
a suitable hosting site.
Wow
So what was your setting on the VVT to get that power?
|
|
40inches
|
posted on 24/3/19 at 04:00 PM |
|
|
quote: Originally posted by pigeondave
quote: Originally posted by 40inches
With the VVT set up as Jaguar from the factory, we got the rated 240bhp, it looks like
Jaguar neutered the engine, possibly for emissions????
And I trust you'l bee winding it back a little for the same reasons ![](/images//smilies/bigsmile.gif)
Out of interest what box and diff are you using?
The standard Getrag S-Type box with Sierra 3.38 diff.
Photos in my archive https://www.locostbuilders.co.uk/photos.php?action=gal&user=40inches&folder=AJ30
|
|
40inches
|
posted on 24/3/19 at 04:08 PM |
|
|
quote: Originally posted by CosKev3
quote: Originally posted by 40inches
Just got back from having the VVT set up.
272bhp after 2 hours on the dyno.
The photo upload has stopped working again So will post the Dyno graphs when I find
a suitable hosting site.
Wow
So what was your setting on the VVT to get that power?
I think on at 1800rpm with 60% TPS and off at 5800RPM.
Strangely the Jag setting is on at 5200rpm, according to one of the Jag manuals, and that
gives 240bhp as per the specs.
The engine had been mapped at the standard settings, but needed a lot more fuel added at the optimum settings.
|
|
CosKev3
|
posted on 24/3/19 at 06:03 PM |
|
|
quote: Originally posted by 40inches
quote: Originally posted by CosKev3
quote: Originally posted by 40inches
Just got back from having the VVT set up.
272bhp after 2 hours on the dyno.
The photo upload has stopped working again So will post the Dyno graphs when I find
a suitable hosting site.
Wow
So what was your setting on the VVT to get that power?
I think on at 1800rpm with 60% TPS and off at 5800RPM.
Strangely the Jag setting is on at 5200rpm, according to one of the Jag manuals, and that
gives 240bhp as per the specs.
The engine had been mapped at the standard settings, but needed a lot more fuel added at the optimum settings.
Really good to know that the ST200 inlet hasn't restricted the engine!
How much more fuel could the standard injectors put in?
I've bought a set of 6 hole mustang injectors for mine,picked them up for what it would cost to get the originals refurbed so thought give them
a go.
|
|
40inches
|
posted on 24/3/19 at 06:30 PM |
|
|
quote: Originally posted by CosKev3
quote: Originally posted by 40inches
quote: Originally posted by CosKev3
quote: Originally posted by 40inches
Just got back from having the VVT set up.
272bhp after 2 hours on the dyno.
The photo upload has stopped working again So will post the Dyno graphs when I find
a suitable hosting site.
Wow
So what was your setting on the VVT to get that power?
I think on at 1800rpm with 60% TPS and off at 5800RPM.
Strangely the Jag setting is on at 5200rpm, according to one of the Jag manuals, and that
gives 240bhp as per the specs.
The engine had been mapped at the standard settings, but needed a lot more fuel added at the optimum settings.
Really good to know that the ST200 inlet hasn't restricted the engine!
How much more fuel could the standard injectors put in?
I've bought a set of 6 hole mustang injectors for mine,picked them up for what it would cost to get the originals refurbed so thought give them
a go.
Not sure, will have a look at the settings, I think they are on about 85% duty cycle. They are around 240cc/min
|
|
BaileyPerformance
|
posted on 25/3/19 at 04:36 PM |
|
|
What did your car make at the wheels?
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
r1_pete
|
posted on 26/3/19 at 12:37 PM |
|
|
Looks like a great result Dave, its really tempting to go for a similar setup in my Scimitar....
|
|
big_wasa
|
posted on 26/3/19 at 04:53 PM |
|
|
If your not in a rush Pete I may be selling mine in a few weeks. I just want to make some brum brum noises first.
|
|
r1_pete
|
posted on 26/3/19 at 07:38 PM |
|
|
quote: Originally posted by big_wasa
If your not in a rush Pete I may be selling mine in a few weeks. I just want to make some brum brum noises first.
No Rush Warren, it’ll be a long parts gather, hiding the total cost from swmbo ![](/images//smilies/bigsmile.gif)
[Edited on 26/3/19 by r1_pete]
|
|
big_wasa
|
posted on 26/3/19 at 08:47 PM |
|
|
Yeh just the silicone hoses are making me wince this month.
|
|
40inches
|
posted on 16/4/19 at 07:58 AM |
|
|
Trying to find a photo hosting site that will embed the photo in a post.
This is the best I can do at the moment https://btcloud.bt.com/web/app/share/invite/uanmtLGpRY
|
|
Partofthechaos
|
posted on 16/4/19 at 04:37 PM |
|
|
That is seriously impressive output for an off the shelf engine, especially one normally used to lug an executive car up and down motorways. 90bhp/L
without anything more than an engine map!
The problem is this is making me excited to get mine built, but I'm doing the kit car thing in reverse. Currently dismantling my second donor,
so starting off with a car and ending up with a kit. ![](/images//smilies/sad.gif)
|
|
big_wasa
|
posted on 17/4/19 at 11:52 AM |
|
|
I keep looking at it and think how the hel does it fit in the hole ![](/images//smilies/shocked.gif)
|
|
40inches
|
posted on 17/4/19 at 12:49 PM |
|
|
quote: Originally posted by big_wasa
I keep looking at it and think how the hel does it fit in the hole
Only just, I had to fit a SAAB idler pulley to clear the chassis. There is 20mm clearance at the cam covers.
Doing it again I would fit an electric water pump, so no need for idler pulleys.
|
|
CosKev3
|
posted on 17/4/19 at 05:09 PM |
|
|
quote: Originally posted by big_wasa
I keep looking at it and think how the hel does it fit in the hole
Once the engine is stripped of unwanted parts it's pretty small tbh,I can drag mine around the garage with ease
![](/images//smilies/bigsmile.gif)
|
|
CosKev3
|
posted on 17/4/19 at 05:13 PM |
|
|
quote: Originally posted by 40inches
quote: Originally posted by big_wasa
I keep looking at it and think how the hel does it fit in the hole
Only just, I had to fit a SAAB idler pulley to clear the chassis. There is 20mm clearance at the cam covers.
Doing it again I would fit an electric water pump, so no need for idler pulleys.
Yeah I've gone for EWP,never used one before but like the sound of how the controller works,faster warm up from cold is a bonus,the controller
just pulses the pump at set intervals until the coolant is nearly at your target temperature set in controller.
With these engines having a remote thermostat the EWP set up makes the pipework set up much easier and neater too.
|
|
CosKev3
|
posted on 17/4/19 at 05:13 PM |
|
|
Incase anybody comes across this thread in future and is interested in the weight of the engine heres some idea:
Bare engine with just small Denso alt fitted=120kg.
As above with ST200 upper inlet manifold and ST200 solid flywheel =132kg.
As above with RX8 6 speed gearbox and Mondeo 240mm clutch=181kg.
[Edited on 17/4/19 by CosKev3]
|
|
big_wasa
|
posted on 17/4/19 at 05:49 PM |
|
|
On the St220 the water pump is driven from a pulley on the back of the head and is prety compact. But that means more plumbing like a Zetec.
I did test fit the adapter plate last week end. One of the locating dowls is in a differant place.
I hope to get started on the wiring loom Easter Monday as the wife is working
[Edited on 17/4/19 by big_wasa]
|
|
CosKev3
|
posted on 17/4/19 at 06:01 PM |
|
|
quote: Originally posted by big_wasa
On the St220 the water pump is driven from a pulley on the back of the head and is prety compact. But that means more plumbing like a Zetec.
I did test fit the adapter plate last week end. One of the locating dowls is in a differant place.
I hope to get started on the wiring loom Easter Monday as the wife is working
[Edited on 17/4/19 by big_wasa]
Who's plate have you bought?
|
|
big_wasa
|
posted on 17/4/19 at 06:14 PM |
|
|
One of Jonathan Hughes Aj30 to Rx8 plates.
|
|