Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Audi 4.2 v8 engine problem
Cluelesstom

posted on 18/10/19 at 10:53 AM Reply With Quote
Audi 4.2 v8 engine problem

Hi guys, hopefully someone knows something about this engine...
I recently put this engine back in and itís developed a intake flap noise, I havenít altered the arm or disturbed anything,
When on idle the vacuum is actuating and causing a tapping noise, if I then move the arm the noise goes. Any other ideas? Would other problems cause this noise?
Thanks.

View User's Profile View All Posts By User U2U Member
nick205

posted on 18/10/19 at 11:31 AM Reply With Quote
I don't know the engine, but have you checked wiring and hoses etc. are correct?

Could a wiring error or vacuum leak cause the problem.

I'm guessing if you removed and refitted the engine you must have disconnected and reconnect a lot of things.

View User's Profile Visit User's Homepage View All Posts By User U2U Member
pewe

posted on 18/10/19 at 11:33 AM Reply With Quote
Sounds like there's a damping issue on the vacuum feed causing the valve to flutter.
I had a similar problem on a supercharged engine where the by-pass valve was clattering.
Solution was to fit a roll-up ciggie filter in the vacuum line to modulate it.
Not saying that's your solution but research in that direction may prove fruitful.
Maybe there's a filter missing or worn out?
Is there a blow-off valve in the system which is past its sell-by date?
I do know on other VW/Audi turbo cars a cheappo plastic BOV is used which probably has a limited life or could just be dirty internally and not functioning properly.
HTH.
Cheers, Pewe10

View User's Profile View All Posts By User U2U Member
Cluelesstom

posted on 18/10/19 at 11:39 AM Reply With Quote
Right, just had a play literally taking everything off related to this hose, then found a little solenoid on the vacation line, unplugged and reconnected, seems to work fine now... only if every problem was this simple..
Sorry guys, maybe a heads up for someone in the near future 😁.
Thanks for your replies

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.