Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Zetec engine mounts
madrallysport

posted on 26/10/19 at 07:19 PM Reply With Quote
Zetec engine mounts

Has any body any Zetec engine mounts they don’t need, it’s for an ST170 so as far as I know same as a black top Zetec





UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.

View User's Profile Visit User's Homepage View All Posts By User U2U Member
loggyboy

posted on 26/10/19 at 08:40 PM Reply With Quote
Will depend on car its going into. Considered making them?
View User's Profile View All Posts By User U2U Member
big_wasa

posted on 27/10/19 at 03:51 PM Reply With Quote
The st block is not identical to the Bt.There is a couple of holes missing on the N/s and one on the O/s.
There are a couple of holes that are drilled for locating dowls so the thread doesn’t start until a few mm down.

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.