Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: OT: wiring zone valve - heating system
dan8400

posted on 4/4/18 at 02:24 PM Reply With Quote
OT: wiring zone valve - heating system

Hi everyone,

I want to know if it is possible to wire a zone vavle in my central heating system, but only on a switch.

I bought a small heat exchanger to heat our above ground pool and I want to be able to turn the vavle between heating and pool manually.

Is this possible?

Ideally, I want to be able to flick something like a light switch and divert the boiler heating water to the exchanger

Thanks
Dan





Hey - That's Journey!!!

View User's Profile E-Mail User View All Posts By User U2U Member
SteveWalker

posted on 4/4/18 at 03:32 PM Reply With Quote
Yes. Make sure that you have a diverter valve rather than a mid-position valve. Water will flow from inlet to one outlet when un-powered and the other outlet when powered. Use the lightswitch to switch power to the valve and use the microswitch on the valve to switch the pump and boiler on continuously when it is switched over. When unpowered, the flow can go to the rest of the central heating system as normal.

Maybe worth fitting a timer to limit the run time in case it accidentally gets turned on and left for weeks!

[Edited on 4/4/18 by SteveWalker]

View User's Profile View All Posts By User U2U Member
dan8400

posted on 4/4/18 at 04:38 PM Reply With Quote
Thanks Steve,

Good idea on the timer.

Thanks
Dan





Hey - That's Journey!!!

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.