Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Raceline Sump Zetec
Plunky

posted on 31/1/16 at 06:16 PM Reply With Quote
Raceline Sump Zetec

Good afternoon,
A while ago I purchased a secondhand Raceline sump for my blacktop Zetec.
The engine was also new to me and didn't come with a sump or oil pick up pipe.
Looking at both engine and sump I am struggling to see how the oil pick pipe part of the sump attaches to the engine.
I have included some pictures to hopefully make this a bit clearer.
Can anyone shed any light please?




View User's Profile View All Posts By User U2U Member
Plunky

posted on 31/1/16 at 06:19 PM Reply With Quote

View User's Profile View All Posts By User U2U Member
DJT

posted on 1/2/16 at 12:59 PM Reply With Quote
There is a 'top hat' spacer with an o-ring on each side. Think of a short tube with a narrow diameter with an o-ring round it, thicker middle section, then another narrow o-ring section. This is squashed between the oil pump and the pick up tube. The pick up tube is bolted to the sump prior to mating with the enigne. If any bits missing try giving Chris at Raceline a call.

Here's mine prior to installation











http://tigeravonbuilddiary.blogspot.com/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
DJT

posted on 1/2/16 at 01:11 PM Reply With Quote
Instructions in Word doc at bottom of this page: http://www.raceline.co.uk/products/part_section.asp?SectionID=40&CategoryID=2





http://tigeravonbuilddiary.blogspot.com/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Plunky

posted on 2/2/16 at 11:57 AM Reply With Quote
quote:
Originally posted by DJT
There is a 'top hat' spacer with an o-ring on each side. Think of a short tube with a narrow diameter with an o-ring round it, thicker middle section, then another narrow o-ring section. This is squashed between the oil pump and the pick up tube. The pick up tube is bolted to the sump prior to mating with the enigne. If any bits missing try giving Chris at Raceline a call.

Here's mine prior to installation








thanks DJT,
Looking at your pictures it looks like I am missing the top hat insert.
where abouts in Hampshire are you based?

View User's Profile View All Posts By User U2U Member
cr500dom

posted on 2/2/16 at 12:30 PM Reply With Quote
Do Also check you have the correct sump..... The Silvertop and Blacktop kits are different
View User's Profile View All Posts By User U2U Member
Plunky

posted on 2/2/16 at 12:48 PM Reply With Quote
quote:
Originally posted by cr500dom
Do Also check you have the correct sump..... The Silvertop and Blacktop kits are different


do you know what's different?

View User's Profile View All Posts By User U2U Member
cr500dom

posted on 2/2/16 at 02:12 PM Reply With Quote
No, just that there are differences, Raceline will know and are very helpful
View User's Profile View All Posts By User U2U Member
DJT

posted on 10/2/16 at 02:57 PM Reply With Quote
quote:
Originally posted by Plunky
quote:
Originally posted by DJTwhere abouts in Hampshire are you based?


Up in the frozen north (Fleet). Although regularly down your way, mostly out for Sunday morning runs with the Southern Kit Car Club. Keep an eye on the SKCC forum if interested.





http://tigeravonbuilddiary.blogspot.com/

View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.