Rwdben
|
| posted on 17/4/18 at 03:11 PM |
|
|
Omex 200/ 600
Hi all, new to the forum and after some advise so I hope I'm posting in the correct place.
I'm after an omex 200 although would consider an omex 600 and later look at going down the injection route,
Can anyone advise the cheapest place to purchase an omex and loom for a zetec.
Thanks in advance
|
|
|
|
|
theduck
|
| posted on 17/4/18 at 03:20 PM |
|
|
You do realise an Omex 200 doesnt do fuel injection?
|
|
|
Rwdben
|
| posted on 17/4/18 at 04:22 PM |
|
|
Hi yes I'm fully aware of this, currently running carb but thinking of possible injection route further down the line, thanks though
|
|
|
johnnybizzle1986
|
| posted on 18/4/18 at 11:56 AM |
|
|
Have you considered the Nodiz Pro? available from Danst Engineering, I bought mine from Chester Sporstcars full loom and mapped so was just plug and
play
|
|
|
Rwdben
|
| posted on 19/4/18 at 01:25 PM |
|
|
Hi I can't say I have but I'll have a look into it, thanks
|
|
|
ttalps2000
|
| posted on 19/4/18 at 06:50 PM |
|
|
i use Megajolt for the ignition only on my zetec as im running carbs. Works very well, but you do need to run the Ford EDIS system with it, whereas
you dont with the Nodiz system
|
|
|
