DorsetStrider
|
| posted on 9/7/10 at 01:37 PM |
|
|
Rogue Engineering
Hiya all.
Just wondered if anyone has bought anything from rogue engineering?
There are a few things they have listed on the bay of E at the moment and was wondering if anyone had bought anything from them and if so what your
experience was like?
rogue engineering on fleabay
Who the f**K tightened this up!
|
|
|
|
|
Dopdog
|
| posted on 9/7/10 at 01:42 PM |
|
|
rogue
i would not buy from them just because of the name 
[Edited on 9/7/10 by Dopdog]
|
|
|
DorsetStrider
|
| posted on 9/7/10 at 01:45 PM |
|
|
That's the only thing putting me off. Hense why I'm wondering if anyone can reasure me it's just a name.
Who the f**K tightened this up!
|
|
|
speed8
|
| posted on 9/7/10 at 01:46 PM |
|
|
I'm assuming it's no relation to the other Rogue Engineering who do some very nice BMW upgrade parts.
http://www.rogueengineering.com/Merchant2/merchant.mvc
|
|
|
HomersDouble
|
| posted on 9/7/10 at 01:52 PM |
|
|
I have had some bush tubes and threaded tube for the wishbones from them - all OK, but their communication is not the best.
|
|
|
femster87
|
| posted on 9/7/10 at 02:06 PM |
|
|
I have bought quite a few things from them and they have been good quality, abut 10 miles to me so quite easy for pickup
|
|
|
drury318
|
| posted on 9/7/10 at 03:33 PM |
|
|
Me too, exactly same as above post, all top quality & easy for me to fetch.
|
|
|
DorsetStrider
|
| posted on 9/7/10 at 04:03 PM |
|
|
So the opinion of people that have bought from them is that it's just a name and I'm ok sending them my hard earned?
Who the f**K tightened this up!
|
|
|
Thinking about it
|
| posted on 9/7/10 at 04:10 PM |
|
|
I bought some diff and susspension brackets and all was fine Collected them very friendly. I think the guy is in the forces and his father runs the
show when he is away.
[Edited on 9/7/10 by Thinking about it]
|
|
|
seventhheaven
|
| posted on 1/3/12 at 09:14 PM |
|
|
Rogue Engineering
I've bought a rear hub kit and some diff mounts. They are all of very good quality and I would not hesitate in recommending people to buy from
this guy.
The parts are accurartely laser cut and from a couple of feet the edges look machined.
I costed up buying the steel for these parts and becuase of minimum order requirements and the general cost of steel, it worked out cheaper to buy
them already made.
They arrived; very well packed; on my doorstep a couple of days after completing the fleabay order.
Ordering the hubs pre-made not only saved me many hours of cutting and filing, it also saved me money.
My recomendation is to buy from this guy.
Plus
Don't forget one of the most popular kit car engines of all time 'Pinto' is brazilian for gentleman parts and Ascona female parts.
Don't even think of looking up 'Pajero' in spanish....
4wd 3.9 Rover V8 Locost 7 - Super 7th Heaven
|
|
|
clairetoo
|
| posted on 1/3/12 at 09:27 PM |
|
|
Put it this way - I sell under the `crapengineering' banner , and have been doing for some time - and I cant make the stuff fast enough to cope
with demand 
Sometimes `tongue in cheek' humor' can sell 
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
loggyboy
|
| posted on 1/3/12 at 10:26 PM |
|
|
I wondered why the ebay link wasnt working - then realised the original post date! lol
Pass the shovel!
|
|
|
michael92
|
| posted on 28/3/12 at 02:12 PM |
|
|
I too have also bought from Rouge, and had a great response 
|
|
|
