can anybody tell me the type of profile sylva used to manufacture the windscreen-surround?

i want to manufacture a speedster screen and therefore need just the sides of the screen surround.
so would be a shame buying a complete surround and immediately "destroy" (cut) it.

It's was a simple U section profile on my Striker.

Complete flyscreen kit available from RAW if it helps - frame and macrolon "screen"- for not much money - £35 IIRC

[Edited on 9/1/20 by Rich J]

quote:

---

Originally posted by MikeRJ
It's was a simple U section profile on my Striker.

---

quote:

---

Originally posted by alfas

quote:

---

Originally posted by MikeRJ
It's was a simple U section profile on my Striker.

---

exactly... and thats the reason i asked...i need the measurements of this u-profile.

the kit from RAW looks interesting.....but considering that i get the makrolon free of charge and hardly have to pay anything for the aluprofile (if i would know the size)....plus shipping abroad.....makes no real sense at the end of the day.

---

as far as i remember (i dont have the car with me at the moemnt) the profile must be slided downwards into a gap given by the construction of the car.

so the tickness of the markolon cannot be freely choosen

The windscreen surround on my Striker is made from U-section channel which is 3/4 inch wide x 3/4 inch tall (outside dimensions).
The metal thickness is 1/8 inch on all three sides.
Bought the kit from Sylva back in 1995.