Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Zetec Silver Top coil pack mounting
Schrodinger

posted on 17/9/20 at 08:18 PM Reply With Quote
Zetec Silver Top coil pack mounting

Is it ok to mount the coil pack on my Silver Top to the bulk head rather than on the cylinder head.
I am trying to reroute my cooling pipework and the coil pack is in the way.





Keith

View User's Profile Visit User's Homepage View All Posts By User U2U Member
cliftyhanger

posted on 17/9/20 at 08:31 PM Reply With Quote
No downsides at all. Except new leads (probably)
View User's Profile View All Posts By User U2U Member
HowardB

posted on 17/9/20 at 08:37 PM Reply With Quote
I made my own bracket as the previous one fouled the bulkhead. Ensure it has a good electrical connection to the block and all will be well.





Howard

Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)

View User's Profile View All Posts By User U2U Member
snippy

posted on 17/9/20 at 08:59 PM Reply With Quote
Yep, it`s fine, I`ve done this on a previous engine. I just needed to buy longer HT leads due to the longer distance they had to cover.
View User's Profile E-Mail User View All Posts By User U2U Member
AlexXtreme

posted on 18/9/20 at 12:15 PM Reply With Quote
I made a bracket under the inlet manifold that has worked fine as this seemed like an area that would more likely stay cool(er).
Still needed longer leads though

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.