I need to start considering what hubs and uprights to use on my build thats similar to the Locost design.
I have looked at some nice ally cortina hubs but at present & particualry with christmas rapidly approaching the wife wont allow. So as a tempoary
measure I want to fit some bog standard cheapo uprights, but the question is which ones?
The book shows some hidious looking tube coming out of the top of the upright. I most certainly do not want this!
Any advice would be most welcome!
Thanks
Steve
Well as you've already decided you want to eventually upgrade to ally Cortina ones, surely the logical step is to buy some standard cortina
uprights from ebay?
Theres always plenty for sale and with a lick of paint are good to go!
Hth, Mark.
I think the ones with the tube out of the top are ford sierra ones.
+1 on both
quote:
Originally posted by MsD
Well as you've already decided you want to eventually upgrade to ally Cortina ones, surely the logical step is to buy some standard cortina uprights from ebay?
Theres always plenty for sale and with a lick of paint are good to go!
Hth, Mark.
Shameless plug, but i have a few sets for sale
sorry for the hi-jack
No thats fine Madrallysport. I will U2U you.
quote:
Originally posted by ceebmoj
I think the ones with the tube out of the top are ford sierra ones.
These any good?
http://www.rallydesign.co.uk/product_info.php?products_id=11815&osCsid=ifggv57esak9spqhao69mv4gg6
quote:
Originally posted by coozer
These any good?
http://www.rallydesign.co.uk/product_info.php?products_id=11815&osCsid=ifggv57esak9spqhao69mv4gg6
quote:
Originally posted by sa-fabrication
I have looked at some nice ally cortina hubs but at present & particualry with christmas rapidly approaching the wife wont allow.
thats the ones im after.
I looked at Hispec motorsports hubs at donnington and thats the set up im aiming at. just all balls down to £££
quote:
Originally posted by adithorp
quote:
Originally posted by ceebmoj
I think the ones with the tube out of the top are ford sierra ones.
If it's the RonChampion book then it'll be Escort hubs in the picture and if Haynes Roadster then Sierra.
If you want to upgrade later to Cortina ally hubs then the obvious fitment is Cortina cast hubs for now as said above.
The other option is the Triumph (Herald?) hubs as used by Caterham (and Sylva J15).