Does anyone have one of these they can sell me?

It is the coupling from a mini r53 (cooper s) waterpump which couples to the supercharger.

All i need is the coupling! - that's it!

can you get someone to make one?

Its not a part that you can knock up out of any material and i would want it to be pretty much perfect, as the coupling has tolerances i dont want to mess with

Tried contacting any of these to see if they have them?

★ MINI R53/r52 2005 BREAKING ★ COOPER S JCW ONE DAMAGED | eBay UK

BREAKING BMW MINI COOPER S R52/R53 | eBay UK

★ MINI R53/r52 2005 BREAKING ★ COOPER S JCW ONE DAMAGED | eBay UK

Ask on MiniTorque

Lots of knowledgeable people on there.

BUMP

This coupling is also on the rear end of anyone with a mini eaton 45 supercharger

If anyone has one of these superchargers and is not using the coupling then would you mind selling it to me!?

Thanks.

It's unlikely that someone is going to deem a waterpump or supercharger they could sell on useless so you can have the coupling.

May have to bite the bullet and buy a used pump and remove it.

Lucky for you I have a 1380 supercharged classic mini

If I can get it to come off the SC easy without too much hassle





PS this was also built the locost way.... manifolds brackets etc all made myself running injection and MS2

[Edited on 2/6/2011 by mikemph]

Excellent - mike you have u2u