Board logo

Speedo for ZX10R
Flamez - 2/7/08 at 06:23 PM

OEM speedos for this engine are like the proverbial rocking horse doo doo.

I have researched Koso, acewell etc and understand I could use them in my build.

But could I use other bike speedos if I had the connector plug and splice into the kawasaki connector.

There are plenty out there with speedo, tacho, warning lights etc.


paulmw - 2/7/08 at 06:42 PM

Give Malc a call at Yorkshire engines. I had to wait a while but he can get you the ZX10R clocks

Paul


eznfrank - 2/7/08 at 06:48 PM

You might be pleasantly surprised if you keep a close eye on the Bay. I was after a set of ZX12 clocks for frickin ages and then up pops a set of the rare 220mph version with no bids and minutes to go - bonus!!!


bobs bangers - 2/7/08 at 09:27 PM

Malc @ Yorkshire engines came good for me too . Just be patient.

Regards

Bob


yorkshire-engines - 2/7/08 at 11:10 PM

2004/5 ZX10 ARE DIFFERENT TO 2006/7
AS WELL

ZX6 WILL FIT AND WORK OK

CHEERS MALC


Flamez - 3/7/08 at 01:18 PM

Thanks malc, any year spec for zx6r clocks I should be looking at?


imp paul - 4/7/08 at 01:07 PM

zx10r clocks got to be worth £200 here you go link to clocks on ebay