sorens2
|
| posted on 6/8/09 at 08:32 PM |
|
|
Where to measure oilpress. on ZX12 2003
I bought an oil press. gauge but where do I fit the press. hose ?
And what tread is it ?
ZX12R 2003 in a MNR VortX 2009 with dry sump.
On the pic there is a sender of some sort.
Soren S2
 
Rescued attachment Oilpress.JPG
|
|
|
|
|
eccsmk
|
| posted on 6/8/09 at 08:45 PM |
|
|
i took my oil pressure gauge feed from where you have shown in the piccy
cant remember what thread but i took the reducing bush to an engineering firm who made a tee up for me so i could re-connect the origional pressure
switch for the clocks
i'll dig through my emails see if i can find the thread size
|
|
|
sorens2
|
| posted on 6/8/09 at 08:47 PM |
|
|
Great info.
Thanks.
Soren S2
|
|
|
eccsmk
|
| posted on 6/8/09 at 08:51 PM |
|
|
cant find the email sorry 
hopefully someone else with a zx12 will be able to help
|
|
|
Moorron
|
| posted on 7/8/09 at 09:16 AM |
|
|
yeh i took mine from there too, i think its 1/8 BSP if im correct but i also took the oil pressure switch (the bit the arrow is pointing too) to a
local hydraulics place and they made a braided pipe up and T piece.
Be carefull when refitting it as that bush is soft and easy to strip.
|
|
|
sorens2
|
| posted on 7/8/09 at 09:15 PM |
|
|
Went into a hydralic store today.
They had everything I needed.
Thanks.
Soren S2
|
|
|
