I'm looking to place an order for chassis mounting clips for the fuel and brake lines. These clips are natural coloured and securely take 2x8mm fuel lines and 1x3/16" brake line. The minimum quantity I can order is 100 (or 200 carriage free).

They are mounted by inserting into a 6.5mm hole then a pin is pushed in to securely lock into place. Unlike p-clips, the pipes are able to be released from the clips if ever needed.

Just to guage interest at the moment - who would be interested in taking either 10 x clips @ £7.50 delivered or 15 x clips @ £10 delivered?



Link to full description of clips (CAC446-NAT) http://www.jetpress.com/Products.aspx/vdhimyvk11/DriveRivetPipeClips-Triple/


Link to full description of clips (CAC446-NAT)

[Edited on 30/7/17 by craigdiver]

Hi Yes I would be interested @ 15 of them.

thanks.

Tony T.

Ordering today, anyone else wanting any?

I may be if you have some spare, will be about 10, but will need to check how I currently route stuff, its been a while since ive been under there.

quote:

---

Originally posted by loggyboy
I may be if you have some spare, will be about 10, but will need to check how I currently route stuff, its been a while since ive been under there.

---

Received clips - now for sale in 'for sale' section of forum.

Do you have any of these available still? Interested in 10.

quote:

---

Originally posted by MikeR
Do you have any of these available still? Interested in 10.

---