Board logo

Had SVA today, and.....
Dangle_kt - 5/10/09 at 05:14 PM

returned with the MAC

http://www.youtube.com/watch?v=twgArtVqMlM&feature=related



SOOOOOOOOO chuffed!

Thank you to Warren (Wozsher) who has been more than helpful over the last few weeks, his work has been top draw.

Thanks also to Steve Hignett (Worx) who has been a top bloke for as long as I;ve known him - and helped massivly to get the car to where it is now!

Also thanks to Joe (Welderman) for sorting my Exhaust which I'd ruined by storing the spare wheel on it without support - OPPS!

Thanks to Lee (Maximillian) who has been super helpful, and is owed a beverage and then some for all his assistance the other week with my carbs.

Big thanks to Andy Bates (I'll get that loom posted back - sorry I forgot!) for being one of the best suppliers I've ever dealt with.

Thanks to everyone else who has helped me too, I didn't mean for this to turn into a thankyou thread, so havn't given it much thought - I'm sure I've missed people out. Most of you have helped and not realised via the forum - so thanks for that too, and of course - thanks for the forum admin and owners - thanks to you I built a car!

[Edited on 5/10/09 by Dangle_kt] Rescued attachment 101_3567.JPG
Rescued attachment 101_3567.JPG


blakep82 - 5/10/09 at 05:17 PM

ha ha! YASSSSSSSSSS!!!!!


CRAIGR - 5/10/09 at 05:17 PM

YAAAAAAAYYYYYYY!!!
Well done


twybrow - 5/10/09 at 05:17 PM

Nice one Dangle - about bloody time!


mistergrumpy - 5/10/09 at 05:18 PM

Ah, it looks like you had Geoff. He must have been in his good mood Seriously nice fella though and very fair.


jacko - 5/10/09 at 05:21 PM

Congratulations well done
Jacko


daniel mason - 5/10/09 at 05:28 PM

well done mate! car looks good


Steve Hignett - 5/10/09 at 05:29 PM

Andy,

I think you deserved that SVA pass more than anyone I've ever met, so congratulations and best wishes from me.


blakep82 - 5/10/09 at 05:29 PM

have a picture of my bard that i grew, in celebration


mudbugracer - 5/10/09 at 05:30 PM

Well done !! great!!


BenB - 5/10/09 at 05:30 PM

Better change your LB build status then

Congratulations!!


McLannahan - 5/10/09 at 05:46 PM

Superb news Andy - Congratulations!


Ahhh....
Ahhh....


Richard Quinn - 5/10/09 at 05:47 PM

At last! Well done. If only it were possible to pass by will power alone eh?


RichardK - 5/10/09 at 05:48 PM

Nice one

Regards

Rich


Dangle_kt - 5/10/09 at 05:59 PM

Thanks guys - I'll tell you the jackenory now!

Car was having emissions sorted at rolling road in Bury - had a knightmare getting it sorted as they just don't know bike carbs! anyhow, they said they had sorted it.

Collected it at 8.30 then across to warrens unit for fitting the speedo healer!

Top job done (great bit of kit them healtec speedo healers) [for reference the red wires are for a switched live, the blacks are neautral, the White is signal IN (sensor side), Green is signal OUT (ECU side). on the v4 healer]

drove round the estate and it worked a treat!

Getting the car onto the trailer and disaster struck! In my haste the ramps spun out and the car was beached!

It was only thanks to a big bloke giving me a warren an hand that I was able to head on my way.

At the other end I was getting the car off the trailer and the bloomin pavement was a bit in the way, a sneeky bit of steering whilst reversing put the rear wheel past it, but the exhaust caught it full! ripped the support bobbin off, and pushed the end of the repackable can into the body of the silencer! all the rivets were ripped out! I thought it was over, but a bit of locost inginuity with tool number one and all was sorted!

Emissions were done first, I was well out! Which I was fuming about as I'd spent a fortune, anyhow had a fiddle and then let the car warm up and it passed - JUST (i'm not sure if geoff was using a bit of artistic licence on the pass to be fair! But I'm not complaining!)

Speedo was a touch out, but that was easy fixed. He drove round the test centre and gave it a bit of omph (you can tell he likes kit cars) i spotted the ripped bobbin was slowly parting company with the end can again! in my haste I grabbed a cloth I had in the passenger seat as we were driving along and tried to heave the end can back in line with the bobbin - burning my hand pretty badly! but the end can stayed on so I'm not fussed!

All in all an eventful day - I'm geneuinly chuffed!

[Edited on 5/10/09 by Dangle_kt]


Gav - 5/10/09 at 06:13 PM

Confabulations


kendo - 5/10/09 at 06:28 PM

Snap!


Me too.


Dangle_kt - 5/10/09 at 06:39 PM

quote:
Originally posted by kendo
Snap!


Me too.


well done Kendo, cracking news!


welderman - 5/10/09 at 06:44 PM

well done about time, just in time for WINTER, lol.

Mind you ive been out today


James - 5/10/09 at 06:44 PM

Well done mate!

Nice feeling isn't it!


Dangle_kt - 5/10/09 at 06:49 PM

quote:
Originally posted by blakep82
have a picture of my bard that i grew, in celebration




Sat taking topless pictures of yourself....another quite night in the call centre I see....


blakep82 - 5/10/09 at 06:52 PM

nah, i was wearing a boob tube

wonder how long it'll take to get the dvla bit sorted now?

you and kendo must be the last SVAers off here now?


DRC INDY 7 - 5/10/09 at 06:55 PM

Well done good feeling isnt it your just in time for the warm winter that we are going to have


Breaker - 5/10/09 at 06:57 PM

well done !!!


adithorp - 5/10/09 at 07:02 PM

Nice one!

adrian


speedyxjs - 5/10/09 at 07:10 PM

Brilliant


chris_smith - 5/10/09 at 07:15 PM

well bloody done that man!!!!

and just after iv took mine off the road for winter D'OH


chris


nick205 - 5/10/09 at 07:50 PM

Nice one Dangle - it's been while coming

Great feeling clutching that bit of paper eh?


Hammerhead - 5/10/09 at 08:19 PM

congrats!


Dangle_kt - 5/10/09 at 08:30 PM

I was "WHHOOOOP"ing my way round the car park driving the car to the trailer!

Didn't care if anyone heard!

Just cracked open a 12 year old malt whisky I've been saving for the occasion.



blakep82 - 5/10/09 at 08:31 PM

quote:
Originally posted by Dangle_kt
Just cracked open a 12 year old malt whisky I've been saving for the occasion.



i hope you know i'm resisting a really bad joke here


maximill666 - 5/10/09 at 09:26 PM

Well done Andy, well chuffed for you mate


matt.c - 5/10/09 at 10:04 PM

Very well done. Nice looking car too!

Get the stripes fitted now.

Matt


t16turbotone - 6/10/09 at 06:28 AM

well done mate!!!!!!


Wheels244 - 6/10/09 at 08:46 PM

Well done Andy

Top work !!

Rob