Hi guys

Is amalgamating tape ok to put round front upper wishbone bull joint to cover the sharpe edges and stop adjustment for the test?

Many thanks
Ian

I found a toy Car in the kids toy box that lost a couple of tyres. But to answer your question what one tester finds acceptable another will not and I doubt tape will be considered perminant enough.


Description

[Edited on 22/4/18 by big_wasa]

I Cable tied a suitable size grommet in over it. Others have used heatshrink or fire innertube.

although i havent yet been through IVA im pretty confident these will pass - I used some master cylinder rubber boot seals i found lying around


Description

Description

I used two layers of cycle innertube which got me through IVA

I used a SWA cable gland pvc shroud.

I used bits of old bicycle inner tube cable tied in place - passed SVA without comment from the tester.

https://www.locostbuilders.co.uk/forum/35/viewthread.php?tid=98197#p id816698

we use these

linky

just cut the bottom away & use cable ties to secure, IVA man really liked them, said they were ideal!