Board logo

subaru boxer dimensions
davimora - 6/12/17 at 09:47 AM

anybody have a subaru engine and can take a couple of measures for me?

googling i found out this figures (from a EJ20 engine):

w = 830
h = 600
l = 710

i plan to use a 1.6/1.8 but as i read.. differences are very little.

gearbox's centerline should be at 165mm from flange, 90mm under input shaft.

anybody can confirm or amend?

hughpinder - 7/12/17 at 08:17 AM

I'm not sure if you can download the files for this
and get any measurements from it?

Best of luck

davimora - 7/12/17 at 12:31 PM

hi Hugh, yes, i checked but.. seems the unit measures was translated for the 3d printer.
anyway.. this morning i decided to present me an EJ20 as Xmas present))

hughpinder - 7/12/17 at 01:16 PM

Much better solution!