Board logo

tapered rod ends for heim joint?
Gre3D - 25/2/19 at 07:27 PM

hi Guys,

in the middle of converting my friends vw polo gt 86C to uniball/ heim joints, building a front axle with triangles.
but to fit these to the front uprights i would need a tapered rod end like the image below.
anyone have a good source for these(and the reamer to go with it)? the only ones i find are located in the US and A.



cheers.

[Edited on 25/2/19 by Gre3D]


rusty nuts - 25/2/19 at 09:04 PM

Rallydesign perhaps?


nick205 - 28/2/19 at 04:21 PM

Are you using a kit of parts or fabricating the parts yourself?

If it's a kit do the kit makers/suppliers not supply this part?