Board logo

Help with quick release steering boss
number-1 - 16/6/19 at 06:26 PM

Can anyone recommend a quick release steering set up that bolts straight to a Moutney classic boss.....6 x 100 pcd?

All of the ones ive see are 6 x 70 pcd

Or if you cant point me in the right direction is there a simple solution to the problem?

This is what is fitted to the car



Cheers

[Edited on 16/6/19 by number-1]


matt5964 - 16/6/19 at 07:08 PM

How about an adaptor plate in between

https://www.europaspares.com/interior-parts/steering-wheels/steering-wheel-boss-adaptors/motolita-boss-adaptor-plate-from-momo-painted.html


number-1 - 16/6/19 at 07:51 PM

Cheers for the reply mate.

The adapter goes the wrong way from what i read?......My boss in the picture is 100 pcd. My steering wheel bolts straight to it so the steering wheel is also 100 pcd

The adapter in the link goes from a 70 pcd boss and allows a 100 pcd wheel fitted


matt5964 - 16/6/19 at 08:03 PM

Sorry didn’t see that

Should be straight forward to as a engineering company to make one as it’s quite simple with the right gear


number-1 - 16/6/19 at 08:25 PM

No probs mate. Yeah i did think about that. I will search tonight for something off the shelf, but if not ill ring a few engineering firms tomorrow

I think i probably need to by a new boss with the 70 mm pcd to make finding a quick release kit easier


MikeR - 16/6/19 at 08:52 PM

Go to demon tweaks. I was randomly looking at this a few weeks ago. I'm sure they (or the people at castle comb) had something.


number-1 - 16/6/19 at 09:18 PM

Cheers for the replies chaps. Ive ordered a boss thats 70 mm pcd. It makes it easier to get stuff to fit as the 100 mm pcd seems to be extinct!