I have for sale 1x Flat Jig which will enable you to make the top and bottom and rear side sections of the standard sized locost. I also have a front suspension jig for wide track wishbone setup.

The Jigs are home made but they have successfully built 2 locost to completion and which subsequently turned out
to be very good cars.

Since the jig was first built its had steel box corners added to give some extra strength, and also adjustable feet to allow you to get it perfectly level.

I also have various paper and card templates for making the sides and rear panels from Ali, Wind Deflector screen, Seat Pads, Dash Panel etc etc. Theres also a steel roll bar and various other locost bits and pieces all of which the buyer is welcome to, all for the princely sum of £125
Im based in Herne Bay, Kent for collection. 07973 761252

I also have the chassis build trolley, which is now in 2 pieces and just needs the side rails welding back on.

The pictures below are just for reference to show what the Jigs went on to produce.


























[Edited on 31/8/11 by ChrisS]

[Edited on 31/8/11 by ChrisS]