Board logo

FS: Engines, Gearbox, Throttle Bodies, Bellhousing, Etc
scootz - 20/12/13 at 12:52 AM

45 THROTTLE BODIES

TWM / Borla 45mm TB's, air horns, linkage and fuel rail.

For DCOE pattern manifold.

Previous owner ground down the injector collars so he could fit shorter Pico style injectors (see second pic). I can supply a set of IWP 042 injectors for an extra fiver. As far as I'm aware, the longer injectors will still fit and seal fine.

Comes with linkage, but no throttle cable bracket.

No TPS fitted (see third pic). Takes a 'clockwise' one.

Someone has ground away at various points on the bodies for bolt clearances (see last pic). Does not detract from the functionality of the TB's... just want to be absolutely honest.

£295 please (UK delivery at a fiver).








REBUILT C20XE RED TOP ENGINE

Stripped and fully rebuilt as follows...

Block bead-blasted
Bores honed
Deck skimmed
New piston rings
New main bearings
New big-end bearings
Block painted

Head acid cleaned
skimmed
Valves reground and cleaned
New oil seals
Distributor alloy blank

New gaskets.
New Gates belt and tensioner kit

New sump
New stainless sump bolts

Rocker cover breather mod
Rocker cover powder coated
New stainless rocker cover bolts
New manifold studs and bolts

Timing Belt cover powder coated

New HT leads
Coil pack and mount

OE flywheel lightened

£895 please and I will throw in a set of new ARP con-rod bolts / paste (not fitted).

Is curently bolted into a small frame, so can be delivered securely on a pallet (UK mainland) for £65.
















XE TO TYPE 9 SBD ALLOY BELLHOUSING & SUNDRIES

All unused.
Short - vertical.
With new SBD gasket, SBD bearing, clutch-arm and SBD bellhousing to engine block bolts. Would cost around £210 from SBD (not including the clutch arm).

£140 + £10 UK mainland delivery from me.






MX5 ENGINE AND GEARBOX

Engine and 5 speed gearbox from a 2005 MK2.5 (VVT).
Comes with alternator, starter, plugs / coils, flywheel and clutch.
I can supply the inlet / throttle body assembly and exhaust manifold if you would like them (both are removed from the head - I don't have the gaskets or bolts).
The car has suffered rear damage and was written off at 55k miles.
I paid a premium for it because the age and mileage information was verified before sale.

Only asking £395 as I need the space! UK mainland delivery can be arranged at £65.


scootz - 2/1/14 at 07:03 PM

2014 bump!


scootz - 3/1/14 at 06:42 PM

THROTTLE BODIES AND BELLHOUSING PARTS SOLD


rdodger - 6/1/14 at 04:14 PM

Hi

Would you sell the MX5 inlet manifold separately?

Cheers


scootz - 6/1/14 at 04:24 PM

I would indeed. I'll pm you in a min


scootz - 8/1/14 at 05:46 PM

REDUCTIONS

XE engine now £800 (I won't be going any lower!).

MX5 kit now £295.


StevieB - 8/1/14 at 06:03 PM

One of these days I'll have some money to hand when you're selling an engine!

That engine would sit really nicely in place of my CVH lump as well


dave - 8/1/14 at 08:33 PM

Dont suppose you have a westfield fuel tank kicking about you dont need? Injection type.


scootz - 8/1/14 at 09:23 PM

'Fraid not Dave.


Ryegault - 15/10/14 at 01:36 PM

Is this still available? Thanks


scootz - 15/10/14 at 03:23 PM

Fraid not - all went some time ago. Apologies for not closing the thread.