Board logo

Wilwood 4 pot M16 front brake kit (sold pending payment)
theprisioner - 14/8/14 at 06:30 PM

I have a pair of very serviceable Wilwood 4 pots/discs/pads/M16 adpator hardware for sale.

P/N JN 120 5005 with 32mm pistons.

These are a complete kit to fit a M16 (Cortina) upright and flange for anybody wanting to upgrade from the standard brakes.

Factor in £20 for postage.

I am about to put these on flea-bay if I don't get a sensible offer.

Grab yourself a bargain.




[Edited on 14/8/14 by theprisioner]

[Edited on 15/8/14 by theprisioner]

loggyboy - 14/8/14 at 06:50 PM

Powerlites? Offers in region of? To suit vented or solid discs?

[Edited on 14-8-14 by loggyboy]

theprisioner - 14/8/14 at 07:05 PM

These are very similar to current Dynalite. They differ by being billeted and a slightly older design but dimensionally almost identical. Unfortunately they only suit solid discs. You cannot fit the pads with a vented disc hence reason for sale.

There is a spacer in the middle that would resolve this if you contact Wilwood if that is your intention.

[Edited on 14/8/14 by theprisioner]

theprisioner - 14/8/14 at 07:58 PM

Further info:

Calliper in cardboard box in picture 1.326Kg. The pads are Willwood part No 150-8850K and are also made by Mintex and others and readily available from Rally Design, Motorsport Tools etc etc

The disk is solid and 245mm in diameter standard Ford pattern fitted to Capris I believe.

JAMSTER - 15/8/14 at 10:03 AM

price???

theprisioner - 15/8/14 at 05:03 PM

Sorry chaps just had an offer to trade them for two 888's brand new (or at least never used). Thanks for the offers I have had.