Continuing with the clearout from the ERA project.

BDA style cam cover to fit a Zetec Silvertop (may fit Blacktop, not sure).





This is the Burton Ford version, so it's the proper cast ally one that replaces the cam cover, not some of these cheap ones that clip over the original.

Overall good condition.
Has had an AN fitting put in the top for a breather (done before I bought it), but I have removed the original breather tube, tapped the hole out and blocked it with a machined down screw so it's flush.
I have replaced all of the screws on the rocker for A4 stainless versions (originals were going a bit rusty). I will include enough, but some may need shortening.
You will need a new gasket, which I believe is actually a black top one, not a Silvertop.

Price £250 inc P&P (New price from Burton £326.63)

I am open to offers, and you are more than welcome to collect from Rye, East Sussex.

i'm very interested. can the AN fitting be removed to enable a blank to be fitted?

Hi, yes you can remove the AN fitting, it's a threaded fitting with a large nut on the back.

Price drop £225 inc P&P

SOLD to doofer.