Open to serious offers. Kidderminster

Fury IRS fury rolling chassis

Factory powder coated, waxoiled inside.

Bigg red sierra front calipers
Reconned drums with new apec shoes and 2x new cylinders

Protech adjustable dampers revalved and oil changed by procomp motorsport
Faulkner springs

Escort 2.9 ratio quick rack

diff from f reg, sierra l estate 1800

Not fitted but included:

Fury sports cars Ali fuel tank & straps

Doner gearbox

2lt zetec blacktop 110k. New cambelt, retroford auxiliary belt parts.

Omex 600 ecu

Motorbike TBS on st170 manifold

Reconned injectors. Billet fuel rail.

Wiring loom

Lots of other little bits & receipts.

Will add images later.

Thanks for looking.

Ed

[Edited on 23/1/16 by mrwibble]

[Edited on 23/1/16 by mrwibble]

[Edited on 23/1/16 by mrwibble]

I take it it's new and not a registered/iva'd rebuild? Does it come with bodywork?

What sort of monies are you wanting?

It would need iva. No bodywork. Well I know I'm gonna lose money on it, but need the space back. My total spend must be around 5k. Interested to know others think it might be worth.

My opinion for what is worth.

Decide on a price you can live with and advertise it at that. The whole make me an offer thing doesn't work on here in my opinion.

I would sell the omex separate. It's an easy sale and will sell for more than what it adds to an unfinished kit.

T9 is another easy sale.

If you decide to split it and have a roll bar that covers both occupants, I'd be interested in that...

For those that are interested in this, Steve at Fury is once again able to supply the Spyder body and both standard and Le Mans bonnets.

Any one know how much a fury body costs?

Yep, just got mine, £1950 with the coloured Gelcoat, that's body tub, bonnet, rear boot liner and side pods

[Edited on 24/1/16 by tims31]

Hi guys thanks for looking. Wasa you may be right about the ecu. Just judging interest for now. Offers over 2k would be considered, I know I could get more if i split it, but for ease will take the hit.

http://rs237.pbsrc.com/albums/ff130/mRWibble/Mobile%20Uploads/tmp_19045-20160124_1008261570990534_zpsk9qsf9gy.jpg?w=480&h=480&fit=clip

http://rs237.pbsrc.com/albums/ff130/mRWibble/Mobile%20Uploads/tmp_19045-20160124_100149-131666787_zpsmy6pfdkw.jpg?w=480&h=480&fit=clip

Will add more later. Tricky on phone

Thanks for looking.

Ed
http://rs237.pbsrc.com/albums/ff130/mRWibble/Mobile%20Uploads/tmp_19045-20160124_1004041414191439_zpszbnchvop.jpg?w=480&h=480&fit=clip

If you do change your mind and decide to let the ECU go separately then please let me know. Mine developed a fault and has been returned to Omex for them to investigate so my car is currently off the road. I work in Worcester so could easily get over to Kidderminster to collect. I could just about stretch to £400 at the moment but if you'd want more than that then I'll probably be better off waiting for the repair on my own unit.

Hi,

So ECU, Type 9, inlet manifold, iTBs & zetec injectors have been sold.

Left is a fury IRS rolling chassis, that has been stored in a garage for 6 years, one of the last put together by Steve before he bought out the business from BGH geartech.

Includes

New/unused protech matched pairs, shocks that were purchased from and revalved by procomp motorsport in Brum for £400+ (have receipts) - ask for more details re spring rates.

Zetec 2lt blacktop - of unknown mileage, but was ebay purchase, my instinct is it would be less than 100k because I wouldn't skimp on that, but I have to assume its a little higher as I can't find the original ebay purchase in my history & I didn't have proof when purchasing.

Has had cambelt change since purchase, no obvious issues seen with the cover off.

Retro ford zetec alternator kit - http://www.retro-ford.co.uk/shop/content/zetec-alternator-kit-black-top-z022

IRS Sierra Diff

Short rack steering (2.9) from rallydesign

Fury Sportcars ali fuel tank (lovely piece of work)

Lots of other little bits and peices

Looking for £1150 to clear everything or I will start to split the shocks and steering rack from the chassis and advertise elsewhere.

Absolute bargain for someone looking to build a fury sportscar - chassis kit alone was over £3k when purchased.

Offers on any of the other items are welcome.

Thanks for looking.

Ed

[Edited on 18/2/16 by mrwibble]

Do you have an exhaust manifold for it, if so will you sell seperately?

Cheers

Is there a roll bar available?

Hi. No zaust manifold or roll bar available.

You have U2U.

Hi.

Chassis now sold, pending balance on collection.

Engine is still for sale, will start a new thread.

Thanks all for looking.

Ed

How much are you after for the engine?