Board logo

Sylva Phoenix race car sprint trackday
Rustyracer - 21/7/18 at 06:48 AM

Sylva Phoenix RGB race car 1999- used for hill climbs and sprints for the past 4 years MSA log booked - The car is not road registered for road use it was built and only used as a race/track/hill climb car it does however have a chassis plate.


Powered by Kawasaki 900cc ZX9R engine and transmission 6 speed- Engine ZX9E1 with one off billet sump and baffling increase oil capacity by 500ml.


Manual paddle gear shift system.

Roll cage (rops) replaced last year to meet current MSA regs.

Bailey Morris bike engine specific damped prop shaft

3.54 open diff

Large Merlin Motor Sports silencer

Nikko G Pack module for ignition

Large 40L foam filled alloy fuel tank

Facet race fuel pump proflow fuel regulator

Braided fuel lines

Spax shocks.

Minilite wheels fitted with Yoko A048 tyres

Alfano didital dash with shift lights, RPM and temperature read out, can be configured as lap timer and for engine hours (have manual)

260 mm vented front discs

Hi Speck alloy R114-4 race calipers with speed event pads

Braided equal length brake lines

Remote operated 2.25L Lifeline zero 2000 fire extinguisher system serviced in 2013 to comply with MSA  race regs ok for speed events but will need a service for racing.

Race LED rain light, external pulls for power cut off and extinguisher

Titon 6 point harness certified to 2017 so ok for speed events but will need replacing for racing.


Spares package


ZX9R C3 engine including shortened baffled sump.

ZX9 fuel pump.

ZX9 up-rated clutch springs (new)

ZX9 clutch pack (new)

ZX9 race ram air box

Chassis tube - The one removed to fit the bike engine.

Chassis tube door protection bar

Pair of 250mm front brake discs.

M16 steel brake cailpers fitted with ferodo race pads

3.89 open diff

one set of race pads

Ignition control unit  

Prop shaft

Diff housing

Springs

Bonnet

One pair side pods

4 x minilite wheels fitted with michelin slicks  

4 x Team Dynamics wheels fitted with Yoko A048 tyres

2 x westfield wheels 

1 x Le-mans light cowel.


The car was built in 2001 by Nick Craddock raced in class A of the 750mc kit car championship fitted with a 1660 xflow then in 2006 fitted with a bike engine and raced in the RGB series and since 2014 used for hill climbs and sprints. My intention was to race in the MSVR Allcomers series and use for sprints but hope to be going historic racing next season.


The car only weights about 475 kgs and with 150-160 bhp it is very quick.


I can sell the car complete with all the spares or the car on its own the winning bidder will need a van for all the spare parts.

£4000 o.n.o


Thanks for looking

Can't seen too add photos please PM me for some.

         

[Edited on 21/7/18 by Rustyracer]


Rustyracer - 25/7/18 at 08:10 AM

quote:
Originally posted by Rustyracer

CAR NOW SOLD THANKS


Sylva Phoenix RGB race car 1999- used for hill climbs and sprints for the past 4 years MSA log booked - The car is not road registered for road use it was built and only used as a race/track/hill climb car it does however have a chassis plate.


Powered by Kawasaki 900cc ZX9R engine and transmission 6 speed- Engine ZX9E1 with one off billet sump and baffling increase oil capacity by 500ml.


Manual paddle gear shift system.

Roll cage (rops) replaced last year to meet current MSA regs.

Bailey Morris bike engine specific damped prop shaft

3.54 open diff

Large Merlin Motor Sports silencer

Nikko G Pack module for ignition

Large 40L foam filled alloy fuel tank

Facet race fuel pump proflow fuel regulator

Braided fuel lines

Spax shocks.

Minilite wheels fitted with Yoko A048 tyres

Alfano didital dash with shift lights, RPM and temperature read out, can be configured as lap timer and for engine hours (have manual)

260 mm vented front discs

Hi Speck alloy R114-4 race calipers with speed event pads

Braided equal length brake lines

Remote operated 2.25L Lifeline zero 2000 fire extinguisher system serviced in 2013 to comply with MSA  race regs ok for speed events but will need a service for racing.

Race LED rain light, external pulls for power cut off and extinguisher

Titon 6 point harness certified to 2017 so ok for speed events but will need replacing for racing.


Spares package


ZX9R C3 engine including shortened baffled sump.

ZX9 fuel pump.

ZX9 up-rated clutch springs (new)

ZX9 clutch pack (new)

ZX9 race ram air box

Chassis tube - The one removed to fit the bike engine.

Chassis tube door protection bar

Pair of 250mm front brake discs.

M16 steel brake cailpers fitted with ferodo race pads

3.89 open diff

one set of race pads

Ignition control unit  

Prop shaft

Diff housing

Springs

Bonnet

One pair side pods

4 x minilite wheels fitted with michelin slicks  

4 x Team Dynamics wheels fitted with Yoko A048 tyres

2 x westfield wheels 

1 x Le-mans light cowel.


The car was built in 2001 by Nick Craddock raced in class A of the 750mc kit car championship fitted with a 1660 xflow then in 2006 fitted with a bike engine and raced in the RGB series and since 2014 used for hill climbs and sprints. My intention was to race in the MSVR Allcomers series and use for sprints but hope to be going historic racing next season.


The car only weights about 475 kgs and with 150-160 bhp it is very quick.


I can sell the car complete with all the spares or the car on its own the winning bidder will need a van for all the spare parts.

£4000 o.n.o


Thanks for looking

Can't seen too add photos please PM me for some.

         

[Edited on 21/7/18 by Rustyracer]