Board logo

Taper Shank Drills, Reamers, Sleeves Plus Metric Taps
perksy - 13/10/19 at 08:40 AM

Having a good sort out at the moment and have a pile of Taper shank drills, Counterbore drills, Reamers and Sleeves

The drills range from 4.5mm up to 25.5mm diameter

The Reamers from 6mm up to 20mm diameter

The Counterbore drills are for M5 up to M12 Cap Heads

The sleeves are 1-2, 3-2, 4-1, and 3-4

Also have a few Taper shank drifts and hand reamers from 6mm to 10mm

There's sets of Metric Taps available aswell


If anybody is after anything just PM and I'll see what I have and we can agree a price from there...

[Edited on 13/10/19 by perksy]

nick205 - 16/10/19 at 09:39 AM

I know you say above sets of metric taps available, but I'm wondering if you might have a 9/16th tap available?

Only need the tap, I have tap wrenches already.

U2U if you prefer.

Thanks,
Nick

perksy - 16/10/19 at 06:05 PM

u2u sent Nick

wowblaauw - 17/10/19 at 03:56 PM

Hi, can you send me more info on the metric taps please.

Thanks

Craig

perksy - 17/10/19 at 04:03 PM

Just sorting them out now
Is there any particular size your after?
I have set/s from M3 up to M16

I've also a selection of Metric Die Nuts if anybody is interested

wowblaauw - 17/10/19 at 04:09 PM

M3-M12 if you can

perksy - 19/10/19 at 10:06 AM

All U2U'S answered

wowblaauw - 19/10/19 at 05:36 PM

U2 sent re: metric taps

perksy - 19/10/19 at 05:43 PM

u2u re sent