Board logo

winter project
frankycopp - 31/10/10 at 01:03 PM

after a winter project would like something with a logbook but will consider anything budget wise will pay what its worth


Hammerhead - 31/10/10 at 02:29 PM

Might you be interested in an mk Indy? Unfinished project but most parts there to complete.


coozer - 31/10/10 at 02:39 PM

Suzuki SJ413 rolling chassis with engine and trans. Currently sorned with the V5. Good condition. £150.

Any good?

Steve


2cv - 31/10/10 at 02:57 PM

Suzuki SJ413 rolling chassis with engine and trans. Currently sorned with the V5. Good condition. £150.

If I were nearer to you I'd snap this up. A Morris 1000 body will sit on without much modding and there you have a 4WD Morris 1000.


coozer - 31/10/10 at 03:39 PM

God idea that, seen one with a Fiesta body on it so anything is possible.

Where abouts are you?

Steve


2cv - 31/10/10 at 04:11 PM

South West and I don't have a trailer any more so mustn't even think of it. However, a year or two ago, I did consider this project and as far as I remember, the Suzuki track is the same as the Morris but the wheelbase is either a little bit shorter or longer depending on which Suzuki you started with. In any event, it would be a simple chassis mod and in theory, you'd be in business. I know things never turn out that simple but it would be an interesting car and hardly a challenge for a Locoster!

[Edited on 31/10/10 by 2cv]


frankycopp - 6/11/10 at 01:48 PM

anyone?


rdodger - 8/11/10 at 02:30 PM

Part built Midtec Spyder?


Barronge - 8/11/10 at 04:44 PM

I have a part built Locost, no log book however i have a engine that has never been stamped, decent alloys, brakes, gaz shocks, Extra efi ECU (never used with loom) and a ginetta plenum for the engine (engine came out a Ginetta junior car hence no stamp)

Not after silly money for it but would probably keep it rather than let it go for nowt.

Let me know if you want any other info

Cheers


Jomibo - 8/11/10 at 09:19 PM

I have a 1994 robin hood s7, with current mot. comes with a huge folder full of build pics, every part receipt/mot its ever had. I have just put a brand new 2 litre pinto in it and renewed the interior. Has full wet weather gear plus tonneau, plus car cover. good to go.
want around 3500. more details if u r interested.
ps. its the one in my profile pic <<<<

[Edited on 8/11/10 by Jomibo]


frankycopp - 14/11/10 at 10:40 AM

anything?


ritchunt - 14/11/10 at 06:56 PM

Got a locost recently rebuilt and resrayed, running a redtop on bogg brothers bike carbs alloy 4 pots etc take 4k for it if anyone is interrsted