Board logo

10mm Kunifer
Andy S - 15/1/14 at 01:00 AM

Thought I would ask here before having to buy more than I need incase someone has some spare after having bought more than they needed.

Looking for a couple of metres of 10mm dia Kunifer tube for a fuel line.

Cheers

Andrew

efiniste - 15/1/14 at 02:45 PM

I think I've got some 8mm if that's any good?

loggyboy - 15/1/14 at 04:25 PM

If its no good for Andy, i might be interested dending on length, price and condition.

Andy S - 15/1/14 at 07:10 PM

Thanks for the offer - I have some 8mm - Specifically need 10mm as Its a low pressure feed to a very fuel hungry engine

Andrew

efiniste - 16/1/14 at 10:22 AM

Blimey Andy. The 8mm is more than enough for the 6l V8 (albeit EFI) in mine. What's yours, a ship's engine?

loggyboy, replied to your u2u

Steve

Andy S - 16/1/14 at 12:04 PM

Hi Steve,

EFI is fine for 8mm as you are delivering fuel at 45-55 + PSI down the fuel line. I am pushing 7 PSI at most from a Facet red top and although its only feeding a mere 4.5L V8. I want it low resistance.

Cheers

Andrew

efiniste - 17/1/14 at 12:34 PM

Have you thought of mounting a bucket and hosepipe above the bonnet somehow?

Andy S - 17/1/14 at 06:34 PM

quote:
Originally posted by efiniste
Have you thought of mounting a bucket and hosepipe above the bonnet somehow?


I already have, it's under the bonnet and made by Holley