Board logo

Wanted - GRP scuttle
Mr Whippy - 11/8/20 at 12:22 PM

Hi,

I'm going to convert the 2b's bonnet to the normal format for a 7 of scuttle, bonnet & nose cone rather than the huge one piece affair.

Does anyone have a GRP scuttle for not much money, happy with a scruffy imperfect example as it will need some major surgery to fit, the final width needed is 117cm, so something close will be fine.

Cheers.





[Edited on 11/8/20 by Mr Whippy]