Board logo

Project anyone?
daniel mason - 6/11/15 at 10:06 PM

NTDWM
Radical Clubsport Chassis / Kit or Racecar Project

craig1410 - 7/11/15 at 12:13 PM

That car led me to this one.

GBS Zero kit car (robin hood,locust, )

Someone please tell me that the photo showing the fuel tank doesn't show what I think it shows!!!
Hint:Roll bar back stay.

baldeagle - 7/11/15 at 12:33 PM

quote:
Originally posted by craig1410
That car led me to this one.

GBS Zero kit car (robin hood,locust, )

Someone please tell me that the photo showing the fuel tank doesn't show what I think it shows!!!
Hint:Roll bar back stay.




[Edited on 7/11/15 by baldeagle]

iank - 7/11/15 at 12:47 PM

quote:
Originally posted by craig1410
That car led me to this one.

GBS Zero kit car (robin hood,locust, )

Someone please tell me that the photo showing the fuel tank doesn't show what I think it shows!!!
Hint:Roll bar back stay.



craig1410 - 7/11/15 at 01:16 PM

I'm hoping it's just the camera angle/depth of field that makes it look as though the backstay is sitting on top of the tank.

Hopefully it's actually a good few inches above the tank and is going to be connected to the top luggage bay rail.

But it certainly caught my eye when I saw it.

theduck - 7/11/15 at 02:00 PM

It's definitely not the normal position...

AndyW - 7/11/15 at 02:27 PM

Mine is about 6 to 8 inches above the tank and about 3 inches out from rear of tank and sits bolted to the top of the rear panel. I think the photo is an illusion.....

ceebmoj - 7/11/15 at 04:53 PM

I think is just the angle of the photo, and the stay is a good bit above the tank. If you look at the stay on the right I think that they are both in about the same position as the top of the tub.