Been to Screwfix this afternoon and saw this bargain advertised..

http://www.screwfix.com/p/evolution-rage3b2102-210mm-compound-mitre-saw-230v/20332




[Edited on 1/5/16 by coozer]

Ive got the Rage 3-S sliding version with laser, great bit of kit, cuts through steel and everthing else with the same blade.
I bought it direct from the Rage factory shop on ebay for £65 delivered.

I'm in the building trade and I have the Evolution Fury 3XL. I can cut through old timber with no concern for nails and it also mitres aluminium and plastic mouldings perfectly. I have had it for sometime now and use it most days and the blade is still sharp. Great tool.

[Edited on 2/5/16 by LBMEFM]

I have A Evolution very similar to this. Have a closer look, as my one does not fill rigid at all. Perfect for my needs.
I bought my just to cut some 80mm aluminum bar.

My place of work has a different one to this (was about £80) and is much more rigid.
http://www.screwfix.com/p/evolution-rage-4-185mm-1250w-chop-saw-110v/ 29725

At £49 it's still good value, but, don't expect it to be like a dearer one.