Board logo

Vehicles with side feed injectors as standard?
Chaz - 16/11/15 at 07:10 AM

Hi all,

I'm looking for some 250cc plus side feed injectors and was hoping to find a list of vehicles which has these as standard.

Nissan 200sx
Nissan 300zx
Subarus


Anything else I can look out for?

Cheers

Theshed - 16/11/15 at 08:04 AM

I have been looking into this as well as I need to swop from Methanol injectors to Petrol (about half the flow). There are lots of big side feed injectors for SR20DET engines. I would love to find some dimensions and see if there are any common standards.

I will follow this thread with interest.

Myke 2463 - 16/11/15 at 09:38 AM

Try this, might help ? http://passionford.com/forum/technical-help-q-and-a/459718-nissan-subaru-injectors-zetec-fitment.html

killerferret666 - 16/11/15 at 09:52 AM

i believe MR2 Toyota 3s-GTE engine has side feed injectors

Thats the MR2 mk2. Revision 2 injectors are 440cc and cheaper then the later rev3 injectors which are larger cc and slightly different size.

madteg - 16/11/15 at 08:01 PM

I am running yellow 440cc subaru side fed injectors in a standard ford fuel rail, would think this would be ok for you.

coyoteboy - 20/12/15 at 01:25 AM

540cc in the latter 3SGTE Engine. Also found in Celica gt4...

I've a couple of sets knocking about if you need any info, I'm looking at converting to 800cc end fed so I've got most bits off just now.

Chaz - 20/12/15 at 08:12 AM

Thanks coyoteboy but I've made the jump already and chopped the side feed and used it as a boss for the black top rail. It's a bit messy but there we go! Thanks for the help!