Hello all

Can anyone help I have 3 questions on the digidash?

1. In simple terms what buttons do I press when I arrive back at the same circuit as previously visited. So i can get all my sector splits and don't have to reset everything.

2. What does 'timer armed' mean?

3. I don't have a disc but when i plug a download lead from the DD2 into the USB on my laptop nothing happens. I want to set everything on the laptop and look through the data


Ive tried ETB and always found them to be very helpful but any advice on here would be very helpful.

thanks in advance

[Edited on 8/7/15 by 750mc]

[Edited on 8/7/15 by 750mc]

No sure on your first two questions but on the third have you installed the usb/serial converter driver to you laptop, if so on the etb software you need to select the correct COM output on the drop down menu.

If you need the driver PM me your email and ill send it across i got it from ETB

Cheers

Adam

[Edited on 9/7/15 by Adam]