Board logo

Oval tube
flange nut - 4/8/17 at 07:49 AM

Does anyone know where I can get a short length of the oval tube used for the headlight supports?
Thanks.


nick205 - 4/8/17 at 08:52 AM

I made friends with a local fabrication company in my area. They were a handy source of metal materials for my build.


Mr Whippy - 4/8/17 at 11:22 AM

could be a cheap skate and just put some round tube in a vice


Smoking Frog - 4/8/17 at 03:28 PM

quote:

could be a cheap skate and just put some round tube in a vice



Yep that's me. Kids old bike frame was the donor. They had outgrown it, honest.


craigdiver - 4/8/17 at 05:05 PM

quote:
Originally posted by Mr Whippy
could be a cheap skate and just put some round tube in a vice


Or just use round tube (like I did) :-)


owelly - 4/8/17 at 08:35 PM

B&Q/Homebase/Wickes wardrobe clothes hanger rail.....
http://www.homebase.co.uk/en/homebaseuk/rothley-oval-tube---chrome-plated---30mm-x-12m-309848


Thatcher - 1/4/18 at 11:10 AM

How much you need got a off cut that's standing in a corner of the garage.


B33fy - 1/4/18 at 03:07 PM

quote:
Originally posted by Mr Whippy
could be a cheap skate and just put some round tube in a vice


It doesn’t form properly doing this, the middle collapses. Needs to be formed properly for integrity and strength.


flange nut - 19/4/18 at 01:39 PM

Thanks Thatcher for the offer but went and bought 2 metres of the required oval tube. I've now got a lot left over.
Geoff


Slimy38 - 19/4/18 at 04:52 PM

quote:
Originally posted by B33fy
quote:
Originally posted by Mr Whippy
could be a cheap skate and just put some round tube in a vice


It doesn’t form properly doing this, the middle collapses. Needs to be formed properly for integrity and strength.


Maybe for chassis or suspension builds, but I would say this approach is ok to hold a couple of headlights?