Board logo

Lathe help needed - beer tokens waiting!
chrsgrain - 27/12/12 at 06:24 PM

Hi all,

I was hoping someone could help - I need to have the bit that holds discs onto a grinder reduced in thickness so my shrinking disc can't hit anything it shouldn't..... a picture is worth a thousand words, this should make things clearer...

Description
Description


Description
Description


See how it pokes out above the plane of the disc - that means it can hit on bits of bodywork which is obviously bad! What I'd like is it turned down so that it lies at least level with the plane of the disc, if not a tiny bit below. The plane of the disc isn't flat, its slightly inclined into the centre, so the attaching disc could do with following that plane, or kept entirely below it - if that makes sense! Another picture may help... Although it doesn't look like it in the picture, there will be enough metal left, especially as there is very little force through the disc when its used.

Description
Description


If anyone is wondering what its for, its for accurately shrinking metal, which helps turn this hole....

Description
Description


via this....

Description
Description


into this... (the dark lines are bits of guidecoat stuck in the grooves from the body file)

Description
Description


Here's hoping someone can help! Cheers

Chris


ReMan - 27/12/12 at 07:49 PM

Sorry cant help, but thats not natural.
More witchcraft!


theprisioner - 27/12/12 at 08:35 PM

I have done exactly the same thing to my 115mm grinder for exactly the same reason. Unfortunately I am at the opposite end of the country from you. I will send you U2U and you can pop it in the post to me if you want.


Fred W B - 28/12/12 at 07:38 AM

if you only want to take material off the outside why not just spin it up with a spacer underneath in the place of the disc and apply a flap disc on another grinder to the surface?

Cheers

Fred W B

[Edited on 28/12/12 by Fred W B]


Peteff - 28/12/12 at 09:23 AM

quote:
Originally posted by Fred W B
if you only want to take material off the outside why not just spin it up with a spacer underneath in the place of the disc and apply a flap disc on another grinder to the surface?
Cheers
Fred W B



I've used the same method with the part held on a bolt or old spindle in the pillar drill chuck and to shape the backs of inlet valves as well.


907 - 28/12/12 at 10:10 AM

Could you form a depressed centre into the shrinking disc?

From your pics it looks as if it's slightly depressed already, and retaining more threads
in the nut would be safer.

If you do "thin" the nut you will also need to shorten the male spindle, or use a spacer.

Cheers,
Paul G


rf900rush - 28/12/12 at 10:50 AM

Hi

If you do not find any one closer, I am in Epsom Surrey, With a small ish lathe, willing to help.
Could also make a spacer for he back if required.

Martin


chrsgrain - 29/12/12 at 01:11 PM

Thanks guys for all the suggestions... I think I'll take Martin up on his offer of thinning the part and making the spacer!

Cheers all...

Chris


rf900rush - 29/12/12 at 10:11 PM

U2U sent

Sadly the Dax Was sold this year.

New project under way but for the kids this time

Just sent to the Painter.
Fortunately I have a brother who Beats Panels and paints, and is now the favorite Uncle.

Primer

Body Primer
Body Primer


Top coat

Body Top coat
Body Top coat


r1_pete - 30/12/12 at 12:36 PM

Will this do? was in the workshop doing some work on the lathe and remembered your post.

Its an M14 thread, and about 1.5mm thick now, 4mm in the raused centre section....


Description
Description