Board logo

The Red Pinto
snapper - 11/1/15 at 07:49 AM

This was supposed to be a budget rebuild however as time went by I just bought more stuff.
I did have most of what I needed either on the engine in the car on on another 2.1 in bits next to it however I just kept buying what was needed
It has new mains and big ends with ARP big end bolts
Injection head 1mm gasket
FR32 cam kit
RS2000 sump
Megajolt
CBR 900 carbs
And a tin of very Red high temp enamel

[URL=http://s750.photobucket.com/user/snapperpaul/media/kit%20Car/0F E2E827-E61E-45AB-8D14-CF27F37FD94F.jpg.html][/URL]


simonrh - 11/1/15 at 08:09 AM

Nice looking motor


coozer - 11/1/15 at 10:02 AM

Very nice, any ideas on power output?


Riskyshift - 11/1/15 at 11:49 AM

Very smart indeed!


MP3C - 11/1/15 at 01:43 PM

Where did you get the 36 - 1 trigger wheel for the crank pulley? Just about to install megajolt onto my pinto and this is one of the last parts required.

Matt


redturner - 11/1/15 at 01:57 PM

Trigger Wheels have a good stock of 'bolt on' trigger wheels.....


snapper - 11/1/15 at 03:31 PM

Power should be at least 130bhp but I hope for more
Triggerwheel was an ebay purchase which I drilled and beveled for lightness


simonrh - 11/1/15 at 03:41 PM

I have just put one of these on mine, centre hole is 12mm which seems to be good fit on the m12 pulley bolt.
http://www.efi-parts.co.uk/index.php?productID=158


MP3C - 11/1/15 at 05:10 PM

quote:
Originally posted by simonrh
I have just put one of these on mine, centre hole is 12mm which seems to be good fit on the m12 pulley bolt.
http://www.efi-parts.co.uk/index.php?productID=158


Awesome, thanks for that!

Matt