Board logo

Identifying 2.0 Duratec
craig_thomas - 8/7/19 at 05:17 PM

Hi

Can someone tell me where I can find the engine code on a 2.0 Duratec please.

https://www.dropbox.com/sc/jpbrlzkq9z0n24a/AADJqF7KbolXtAu5NPlLjFlqa


obfripper - 8/7/19 at 06:36 PM

That's a crate ford power products duratec, there should be an engine code on the sticker on the rocker cover, likely DHE420.
It could have come from a caterham, morgan, westfield, or other small volume manufacturer.
The codes are unique to ford power products, and don't directly relate to factory fitted engine codes.

It would originally be supplied like this:
https://www.burtonpower.com/ford-built-2-0-duratec-he-i4-std-crate-engine-new-fd2000.html

Dave


big-vee-twin - 8/7/19 at 06:51 PM

On the bell housing flange stamped in.


craig_thomas - 8/7/19 at 06:53 PM

Thanks Dave

It is out of a factory built westy.

Do you think it’s a i4 Engine then?

quote:
Originally posted by obfripper
That's a crate ford power products duratec, there should be an engine code on the sticker on the rocker cover, likely DHE420.
It could have come from a caterham, morgan, westfield, or other small volume manufacturer.
The codes are unique to ford power products, and don't directly relate to factory fitted engine codes.

It would originally be supplied like this:
https://www.burtonpower.com/ford-built-2-0-duratec-he-i4-std-crate-engine-new-fd2000.html

Dave


craig_thomas - 8/7/19 at 06:55 PM

https://www.dropbox.com/s/ddnkuj51b4q5lur/Photo%2008-07-2019%2C%2019%2054%2022.jpg?dl=0

quote:
Originally posted by big-vee-twin
On the bell housing flange stamped in.


obfripper - 8/7/19 at 07:57 PM

It looks to be the same engine as the burton's link (no cam phase sensor, ford commission plate), there's nothing to say what is done to the engine tuning wise, however 200bhp is do able with the right taper thottle bodies, exhaust and no other mods.

Dave

quote:
Originally posted by craig_thomas
Thanks Dave

It is out of a factory built westy.

Do you think it’s a i4 Engine then?



big-vee-twin - 8/7/19 at 08:31 PM

It's not on the mating surface there is a flat with numbers stamped on you can still see it with box fitted.


quote:
Originally posted by craig_thomas
https://www.dropbox.com/s/ddnkuj51b4q5lur/Photo%2008-07-2019%2C%2019%2054%2022.jpg?dl=0

quote:
Originally posted by big-vee-twin
On the bell housing flange stamped in.



[Edited on 8/7/19 by big-vee-twin]