rf900rush
|
| posted on 3/1/09 at 11:19 PM |
|
|
Fair Exchange
My brother painted my Rush at the end of 2008 with chav green/purle flip paint.
And in exchange I've made him two twin Power LED bicycle lamp units.
|
|
|
|
|
mediabloke
|
| posted on 4/1/09 at 02:20 AM |
|
|
quote:
Originally posted by rf900rush
My brother painted my Rush at the end of 2008 with chav green/purle flip paint.
Blimey! Excellent quality from one so young. Take it that's the bloke sat in the driving seat? lol 
|
|
|
speedyxjs
|
| posted on 4/1/09 at 08:35 AM |
|
|
quote:
Originally posted by mediabloke
quote:
Originally posted by rf900rush
My brother painted my Rush at the end of 2008 with chav green/purle flip paint.
Blimey! Excellent quality from one so young. Take it that's the bloke sat in the driving seat? lol
Looks good 
How long can i resist the temptation to drop a V8 in?
|
|
|
Guinness
|
| posted on 4/1/09 at 08:44 AM |
|
|
I'm liking those bike lights!
Let me know if you ever start taking orders!
Mike
|
|
|
Peteff
|
| posted on 4/1/09 at 10:33 AM |
|
|
Did he learn that at playschool, our kids only di finger painting
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
blakep82
|
| posted on 4/1/09 at 02:53 PM |
|
|
why is that 'chav'?!
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Meeerrrk
|
| posted on 4/1/09 at 06:14 PM |
|
|
the nipper did well
2nd on the lights, put them into production
For Sale : 2008 Aries/Stuart Taylor Motorsport Locoblade (954 Blade)
|
|
|
02GF74
|
| posted on 4/1/09 at 08:06 PM |
|
|
nice - far better than mine which are made from bit of copper pipe; still not completed them as need to make a clear lens to seal the front and a rear
panel for the switch.
If I had CNC I would do similar - they certainly get hot - my 5 W LEDs get the tube up to 50 degress! 
What are the lens/lamp modules you are using BTW?
|
|
|
rf900rush
|
| posted on 4/1/09 at 10:33 PM |
|
|
CNC was on a Warco minor Mill/Drill using TurboCnc
Link and some old stepper motors. The locost CNC system.
Led's were from Farnell
I think simular to this part number (1440715).
Not sure of the exact number as I did not get them.
Lense from Farnell (1380861)
LED
Lense
If I make them for just a £1 an hour they woluld be £250 each
As for heat, they are solder to a copper strip U shape.
Hopefully it will work ok.
[Edited on 4/1/09 by rf900rush]
|
|
|
