GeoffT
|
| posted on 30/3/11 at 10:10 AM |
|
|
Garage clearout
Time to try and make some space in my garage so a few items up for grabs. Collection only for these items I'm afraid, but that can be from
Bracknell, one of the Newlands meets or the Stoneleigh show.
I've tried to be very fair with the pricing, but if you think I've got it wrong by all means try an offer, I won't be offended
(much).
This also coincides with my first ever attempt to post pics on locostbuilders, so if I cock up please be gentle with me.... Pics are in photo
archive if needed.
Here we go,
1 - Pair of unused brake disks 240mm, 48mm offset, 4x108. I think possibly of Peugeot origin, handy for that rear disk conversion? £15
 
Brake disks 1
 
Brake disks 2
2 - Escort mk2 wheel with usable tyre. Free to collector.
 
Escort wheel
3 - Xflow stainless 4-2-1 exhaust. Originally a Caterham item I think, the outlet angle has been modified slightly to suit a standard width locost.
£30
 
Xflow exh manifold
4 - A selection of alternators from k series engines. All working to the best of my knowledge. From L-R £5, £10, £15, or £25 for the lot.
 
k series altenators 1
 
k series altenators 2
5 - 32DGAV carb & manifold removed from a 1600 xflow GT spec engine. In excellent clean condition, £30.
 
xflow carb & manifold
6 - Nippon Denso alternator in excellent condition. Hopefully the label will id it, may have been from a Daihatsu Charade. £15
 
Denso altenator 1
 
Denso altenator 2
7 - Sierra brake m/c with reservoir, fairly new item as removed from my Locost, £15.
 
Sierra m/cylinder
8 - Brand new Ford brake m/c plus reservoir, 19mm bore, 4 outlets. £15.
 
New m/cylinder
9 - K series head in excellent condition. bought as a spare but never used. Distributor EU2, looks fairly new. £50
 
k head 1
 
k head 2
10 - Escort RS2000 type 9" rear drum brakes. Backplates redrilled to suit locost, original drillings obviously still usable if needed. Good
shoes, drums and cylinders, all springs/fittings included, just need a fresh lick of paint. £25
 
Escort 9" rear brakes
11 - Rover VVC aluminium (not plastic!) intake plenum. Throttle body missing, otherwise complete, £25
 
k vvc plenum
12 - k series starter. £10.
 
k series starter
13 - GSXR600 airbox, no trumpets, £5.
 
GSXR600 airbox
14 - Rover coilpack, £5.
 
k HT coilpack
15 - Unused, reconditioned Pinto starter. Not sure exactly which Pinto, see photos for more info. £25.
 
Pinto starter 1
 
Pinto starter 2
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
madrallysport
|
| posted on 30/3/11 at 10:14 AM |
|
|
Hi' i'll have the ointo starter please, if your able to post it.
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
GeoffT
|
| posted on 30/3/11 at 10:16 AM |
|
|
LOL, not sure how that one crept in. I'll try that again
Pinto starter 1
|
|
|
GeoffT
|
| posted on 30/3/11 at 10:18 AM |
|
|
Damn, it's obviously convinced that's a Pinto starter, I'm guessing I've got two pics in the archive with the same title.
You all know what one looks like anyway....
[Edited on 30/3/11 by GeoffT]
|
|
|
myke pocock
|
| posted on 30/3/11 at 10:30 AM |
|
|
I would take the carb and manifold but only if you are able to post. See what you think and PM me the total cost and your address for payment if you
could do that.
|
|
|
Daddylonglegs
|
| posted on 30/3/11 at 10:45 AM |
|
|
I'm intrested in the Sierra M/C chap - posted?
It looks like the Midget is winning at the moment......
|
|
|
montythemole
|
| posted on 30/3/11 at 10:49 AM |
|
|
Does the exhaust manifold bring the exhaust out the side of the car for a side mounted silencer? The xflow on the Dutton has a normal under car
system and it's limiting the ride height as seen here:
(will also need to sort the sump as well of course!)
1985 Dutton Phaeton Series 3 1300GT
|
|
|
GeoffT
|
| posted on 30/3/11 at 10:52 AM |
|
|
I'm really trying to avoid getting involved with p&p, but I'll check out the likely cost and get back to you both.
|
|
|
GeoffT
|
| posted on 30/3/11 at 10:55 AM |
|
|
Yes, it's a side exit manifold. It fits a locost perfectly but would almost certainly need modding to fit the Dutton.
|
|
|
montythemole
|
| posted on 30/3/11 at 11:09 AM |
|
|
Because a Duttons ugly?
Any chance you could measure from engine face of manifold to centre line of outlet please?
1985 Dutton Phaeton Series 3 1300GT
|
|
|
g60_edge
|
| posted on 30/3/11 at 11:18 AM |
|
|
can i take the Nippon Denso alternator please
can pick up
thanks
Alex
|
|
|
GeoffT
|
| posted on 30/3/11 at 11:36 AM |
|
|
Item 6 (Denso alternator) now sold.
|
|
|
omega 24 v6
|
| posted on 30/3/11 at 11:42 AM |
|
|
New ford master cyl please for me ( As long as it is defo 19mm bore) Am just leaving now but will U2U you later regarding payment/postage.
If it looks wrong it probably is wrong.
|
|
|
GeoffT
|
| posted on 30/3/11 at 11:42 AM |
|
|
quote:
Because a Duttons ugly? Any chance you could measure from engine face of manifold to centre line of outlet please?
Do I detect a slght oversenstivity there............
The measurement you require is around 17".
|
|
|
montythemole
|
| posted on 30/3/11 at 12:17 PM |
|
|
quote:
Originally posted by GeoffT
quote:
Because a Duttons ugly? Any chance you could measure from engine face of manifold to centre line of outlet please?
Do I detect a slght oversenstivity there............
The measurement you require is around 17".
No I'm well aware they're the ugly duckling of the sevenesque world! Even I sometimes catch it from odd angles and throw up in my mouth a
little bit....
Will go have a measure regards the 17".
1985 Dutton Phaeton Series 3 1300GT
|
|
|
Confused but excited.
|
| posted on 30/3/11 at 12:49 PM |
|
|
Hi Geoff, if montythemole doesn't want the exhaust manifold, can I have second dibs please.
It's too far for me to collect but I will happily pay the postage.
U2U sent.
Tell them about the bent treacle edges!
|
|
|
GeoffT
|
| posted on 30/3/11 at 01:16 PM |
|
|
Looks safe to say then that item 3 (xflow ex manifold) is now sold.
|
|
|
GeoffT
|
| posted on 30/3/11 at 03:34 PM |
|
|
Item 7 (Sierra m/cyl) now SOLD
|
|
|
GeoffT
|
| posted on 30/3/11 at 09:01 PM |
|
|
Item 8 (Ford m/cyl) now sold.
|
|
|
GeoffT
|
| posted on 31/3/11 at 12:11 PM |
|
|
Item 5 (32DGAV carb and manifold) now sold.
|
|
|
Cheffy
|
| posted on 31/3/11 at 12:47 PM |
|
|
Hi,
If for any reason Alex decides he doesn't want the Nippon Denso alternator I'd be interested. Can also collect.
Cheers,
Martin.
[Edited on 31/3/11 by Cheffy]
Farts are like Rock'n'Roll. You love your own but you hate everybody else's. Lemmy, Motorhead.
|
|
|
GeoffT
|
| posted on 31/3/11 at 08:09 PM |
|
|
quote:
Hi, If for any reason Alex decides he doesn't want the Nippon Denso alternator I'd be interested. Can also collect. Cheers, Martin.
Ok Martin, noted.
|
|
|
GeoffT
|
| posted on 4/4/11 at 03:57 PM |
|
|
Just an unashamed bump really, but as mentioned try an offer if you fancy anything.
|
|
|
James
|
| posted on 9/4/11 at 07:11 PM |
|
|
Earth to Geoff!
Come in please... you time is up! 
http://www.locostbuilders.co.uk/viewthread.php?tid=153284
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
|
montythemole
|
| posted on 19/4/11 at 07:55 AM |
|
|
Belated thanks for the manifold, not fitted yet but using hi-tech 'holding it in place' technology looks the business. Now to sort a side
mounted silencer and a shortened sump and I can have the Dutton in the weeds.
1985 Dutton Phaeton Series 3 1300GT
|
|
|
