DH2
|
| posted on 2/7/12 at 01:17 PM |
|
|
Roll bar
Following an upgrade to a full cage, I have the roll bar from my Stylus for sale.
 
Overall height = 500mm.
Overall width = 930mm, width of hoop = 820mm, width between fitting plates on rear braces = 895mm.
Should fit all Stylus chassis without problem, and I suspect would fit a Fury chassis too. Could obviously be modified to fit any other vehicle - if
you want some extra measuring to check, let me know.
In overall good condition, though some scratches to powder coating.
Open to sane offers...
DH2
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
DH2
|
| posted on 28/8/12 at 01:47 PM |
|
|
Still tripping over this in the garage, so, BTTT.
|
|
|
ChrisLeary
|
| posted on 28/8/12 at 02:07 PM |
|
|
What sort of money are you after for it? And please don't say pounds!
I'll have a measure up later depending on price.
Cheers,
Chris
|
|
|
DH2
|
| posted on 1/11/12 at 12:57 PM |
|
|
BTTT, plus...
Adjustable panhard rod. Polybushed, though one of the bushes may benefit from replacement.
Open to sane offers.
DH2
|
|
|
DH2
|
| posted on 16/11/12 at 02:52 PM |
|
|
BTTT...
|
|
|
DH2
|
| posted on 11/2/13 at 12:53 PM |
|
|
Tidied the garage up yesterday, fell over these parts again...
Also have a pair of donor MX5 front uprights/hubs, in decent working order, need a clean up.
DH2
|
|
|
CRAIGR
|
| posted on 11/2/13 at 01:30 PM |
|
|
Is the hood usable with the roll bar fitted ??
|
|
|
DH2
|
| posted on 11/2/13 at 02:29 PM |
|
|
quote:
Originally posted by CRAIGR
Is the hood usable with the roll bar fitted ??
The hood which was on my car, just about fitted, using the roll bar in place of the hood bars.
|
|
|
DH2
|
| posted on 23/4/13 at 02:38 PM |
|
|
I still have the roll bar and adjustable panhard rod for sale.
Also: MX5 handbrake lever, complete with plastics, in decent condition = £15 posted.
DH2
|
|
|
