marc n
|
| posted on 11/2/13 at 11:49 AM |
|
|
mnr parts clearout
hi all
thought i would offer here first. But all items will be listed on ebay tomorrow if no interest on here
1. Honda fireblade 919 billet sump , pickup pipe and baffle plate. Used so has scratches etc £100
2. Honda fireblade 919cc engine and wiring loom and ecu ( no carbs or voltage regulator or coils ) this was built by andy bates for rgb class c as it
used to be , so is the magnesium spec version which gives the most power. Used for 3 races then stored has just been checked over by daytuner and is
ready to go comes with billet sump pickup pipe and baffle plate ( andy bates version ) £800
3. Ab performance airbox system for 919 fireblade complete ( new cost £450 ) £200
4. honda fireblade barnett clutch plates ( steels and friction ) new £30
5. honda fireblade ebc clutch plates ( steels and friction ) and pressure spring kit new £50
5. Pipercross airfilter and baseplate ( no retaining clips ) co63d ( Now sold )
6. racetech voltmeters x 2 never used just dusty new (£30 +vat £10 ) £15 each
7. racetech oil pressure gauge never used just dusty ( new £30 +vat ) £20
8. racetech ammeter never used just dusty ( new £40 +vat ) £25
9. zx9r clutch heavy duty springs ( Now sold )
8. Pair of wide mnr rear arches in red 14 inches wide £
9. mnr bonnet in red ( used ) with airscoop £20
10. mnr bonnet new in red £
11. racetech oil cooler 235 long 13 row with dash 10 fittings brand new never used ( new £60 + vat ) £ 30
12. Yamaha r1 4xv / 5pw loom £5
13. r1 08 exhaust manifold ( road system 4 into 1 ) with collector used £150
14. r1 4xv / 5pw exhaust manifold ( road system 4 into 1 ) with collector used £150
15. stainless steel silencer and link pipe 30 inches long x 5 inch diameter with tailpipe £35
16. pair of sierra cyclewing brackets from rally design new unpowdercoated new £40 +vat £20
Please do not u2u as i cant seem to acess them. please call 01423780196 or email either of the addresses on our website
[Edited on 11/2/13 by marc n]
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
|
|
madrallysport
|
| posted on 11/2/13 at 05:59 PM |
|
|
Email send re item 12. on ur list
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
IainL
|
| posted on 11/2/13 at 06:36 PM |
|
|
Email sent about item 3 on your
Cheers,
Iainl
|
|
|
Ian Jones
|
| posted on 11/2/13 at 06:43 PM |
|
|
what sort of bhp would number 2 put out please?
|
|
|
marc n
|
| posted on 11/2/13 at 06:54 PM |
|
|
Dependant on exhaust and induction systems used with engine would guess
anywhere from 120 - 135 bhp
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
johnny chimpo
|
| posted on 11/2/13 at 07:02 PM |
|
|
Hi Marc, any pics of the racetech oil pressure gauge?
|
|
|
marc n
|
| posted on 11/2/13 at 07:04 PM |
|
|
Please don't u2u as I'm not always able to open / answer them :-)
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
daniel mason
|
| posted on 11/2/13 at 08:16 PM |
|
|
marc. whats the silencer like condition wise? i need one but need 60 - 63mm diamiter inlet/link pipe! cheers. if its ok ill pop up for it on a weekend
|
|
|
BangedupTiger
|
| posted on 11/2/13 at 09:11 PM |
|
|
Email sent re 11.
|
|
|
Inspired_dave
|
| posted on 11/2/13 at 09:28 PM |
|
|
Hi Marc,
Can I please take one of the Racetech voltmeters if it looks like this..
|
|
|
marc n
|
| posted on 11/2/13 at 09:47 PM |
|
|
Yes volt meter is that model :-)
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
marc n
|
| posted on 11/2/13 at 09:48 PM |
|
|
Hi Daniel
The silencer is only 2 inch inlet and outlet I'm afraid
Cheers
Marc
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
marc n
|
| posted on 11/2/13 at 09:49 PM |
|
|
No pic of oil pressure gauge I'm afraid as I'm on the iPad and have no pics on it. It is on the race parts website :-)
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
sdh2903
|
| posted on 11/2/13 at 09:53 PM |
|
|
Any pics of the silencer?
[Edited on 11/2/13 by sdh2903]
|
|
|
marc n
|
| posted on 11/2/13 at 09:54 PM |
|
|
Which exhaust ?? I may have listed it earlier on eBay from work ..
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
sdh2903
|
| posted on 11/2/13 at 09:58 PM |
|
|
Item 15
|
|
|
ceebmoj
|
| posted on 11/2/13 at 10:21 PM |
|
|
does any body know if item
1. Honda fireblade 919 billet sump , pickup pipe and baffle plate. Used so has scratches etc.
will fit an 893?
|
|
|
johnny chimpo
|
| posted on 11/2/13 at 10:23 PM |
|
|
Is it mechanical oil pressure gauge like this -
GMechanical racetech gauge
Or electrical gauge like this -
Electrical racetech gauge
Cheers
G
[Edited on 11/2/13 by johnny chimpo]
|
|
|
marc n
|
| posted on 11/2/13 at 10:29 PM |
|
|
electrical oil pressure gauge :-)
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
marc n
|
| posted on 11/2/13 at 10:33 PM |
|
|
re silencer cant manage to upload pics ( not that good on a computer ) so will list on ebay know how to upload pics to there :-)
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
marc n
|
| posted on 11/2/13 at 10:35 PM |
|
|
not sure on sump would suspect not compatible
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
sdh2903
|
| posted on 11/2/13 at 10:36 PM |
|
|
No probs, do you have a link to your ebay listings or a username?
|
|
|
marc n
|
| posted on 12/2/13 at 10:02 AM |
|
|
we have a storage building full of parts that will be appearing on ebay in the next few days, including prototype cars and projects that may be of
interest
All parts listed above will now be transfered to ebay plus lots more over the coming days
here
cheers
marc
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
