tompat3463
|
| posted on 11/8/14 at 02:27 PM |
|
|
my homebrew cbr900 mini project. with pics
its been 2 years since I bought my bare mini shell and here are my progress pics so far.
please give comments at the end.. thanks
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
Description
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
[Edited on 11/8/14 by tompat3463]
|
|
|
|
|
Matt21
|
| posted on 11/8/14 at 03:30 PM |
|
|
interesting.....
from what i gather, you're having it fwd, with a short chain drive to a rear diff mounted at the front?
any reason you went fwd rather than rwd? easier i guess?!
|
|
|
Minicooper
|
| posted on 11/8/14 at 05:08 PM |
|
|
How can you get a chain diff in there? the R1 is incredibly tight and it is much shorter with the stacked gearbox than a cbr900
Good luck anyway
David
|
|
|
snapper
|
| posted on 11/8/14 at 07:15 PM |
|
|
Does make them very nose heavy
You want as much weight as you can in the rear to counter
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
Minicooper
|
| posted on 11/8/14 at 07:38 PM |
|
|
quote:
Originally posted by snapper
Does make them very nose heavy
You want as much weight as you can in the rear to counter
It doesn't make them nose heavy, as you lose about 70kgs from the front end
David
|
|
|
tompat3463
|
| posted on 11/8/14 at 07:54 PM |
|
|
Thanks for the comments.
It was an absolute nightmare getting it all working but it drives fine. A very tight squeeze.
The chain runs straight down from the gb sprocket. The front of the chain runs in front of the gear selector shaft and the round the diff then back to
the gb sprocket
|
|
|
Minicooper
|
| posted on 11/8/14 at 08:06 PM |
|
|
Have you removed the water pump to get room?
David
|
|
|
ReMan
|
| posted on 11/8/14 at 09:15 PM |
|
|
quote:
Originally posted by tompat3463
Thanks for the comments.
It was an absolute nightmare getting it all working but it drives fine. A very tight squeeze.
The chain runs straight down from the gb sprocket. The front of the chain runs in front of the gear selector shaft and the round the diff then back to
the gb sprocket
Thats similar to what I'd planned for the Cinquecento, fortunately? I hated it to much to peruse it so sold it
Well done, be interesting to see the gubbins picture 
Great project 
www.plusnine.co.uk
|
|
|
tompat3463
|
| posted on 13/8/14 at 02:28 PM |
|
|
no..water pump is still there and working. just managed to get everything in and working.. chain clears everything by about 15mm so im hoping there
isnt too much "flailing" of the chain when booting it or things might foul each other slightly
also the sprocket has about 5mm clearance of the gear selector shaft but the more ive thought about it a 10mm shim infront of the gearbox sprocket
will mena I can slide the diff the clear the thick park of the gear change chaft and then will have 15mm clearance
cheers Alan
|
|
|
